Cylinder block 948 ccm & 1098 ccm
standard size. Specifications: 948 cc four cylinder engine with 5 ring pistons, standard bore size: 2.4775"
with 948cc engine to October 1962: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 1
standard size. Specifications: 848 cc and 948 cc four cylinder engine with 5 ring pistons, standard bore size: 2.4775"
with 948cc engine to October 1962: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 1
+0.020" oversize. Specifications: 848 cc and 948 cc four cylinder engine with 5 ring pistons, standard bore size: 2.4775"
with 948cc engine to October 1962: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 1
+0.030" oversize. Specifications: 948 cc four cylinder engine with 5 ring pistons, standard bore size: 2.4775"
with 948cc engine to October 1962: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 1
+0.040" oversize. Specifications: 948 cc four cylinder engine with 5 ring pistons, standard bore size: 2.4775"
with 948cc engine to October 1962: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 1
+0.060" oversize. Specifications: 948 cc four cylinder engine with 5 ring pistons, standard bore size: 2.4775"
with 948cc engine to October 1962: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 1
standard size. Fits 4 ring and 5 ring pistons
1098 cc.
Required: 1
+ 0.020" oversize. Fits 4 ring and 5 ring pistons
1098 cc.
Required: 1
+ 0.030" oversize. Fits 4 ring and 5 ring pistons
1098 cc.
Required: 1
+ 0.040" oversize. Fits 4 ring and 5 ring pistons
1098 cc.
Required: 1
+ 0.060" oversize. Fits 4 ring and 5 ring pistons
1098 cc.
Required: 1
standard size. Specifications: 948cc. engine, 5-ring piston, standard bore size: 2.4775", compression ratio: 8.3:1. With piston rings and pins assembly
948cc engine (to October 1962)
- compression ratio 8.3 : 1. With piston rings and pins. Usable instead of the original Hepolite piston.
Required: 4
+0.020" oversize. Specifications: 948cc. engine, 5-ring piston, standard bore size: 2.4775", compression ratio: 8.3:1. With piston rings and pins assembly
948cc engine (to October 1962)
Required: 4
+0.030" oversize. Specifications: 948cc. engine, 5-ring piston, standard bore size: 2.4775", compression ratio: 8.3:1. With piston rings and pins assembly
948cc engine (to October 1962)
Required: 4
+0.040" oversize. Specifications: 948cc. engine, 5-ring piston, standard bore size: 2.4775", compression ratio: 8.3:1. With piston rings and pins assembly
948cc engine (to October 1962)
- compression ratio 8.3 : 1. With piston rings and pins. Usable instead of the original Hepolite piston.
Required: 4
+0.060" oversize. Specifications: 948cc. engine, 5-ring piston, standard bore size: 2.4775", compression ratio: 8.3:1. With piston rings and pins assembly
948cc engine (to October 1962)
- compression ratio 8.3 : 1. With piston rings and pins. Usable instead of the original Hepolite piston.
Required: 4
standard size. Specifications: 948cc. engine, 5-ring piston, standard bore size: 2.4775", compression ratio: 8.3:1
948cc engine (to October 1962)
Required: 1
+0.020" oversize. Specifications: 948cc. engine, 5-ring piston, standard bore size: 2.4775", compression ratio: 8.3:1
948cc engine (to October 1962)
Required: 1
+0.030" oversize. Specifications: 948cc. engine, 5-ring piston, standard bore size: 2.4775", compression ratio: 8.3:1
948cc engine (to October 1962)
Required: 1
+0.040" oversize. Specifications: 948cc. engine, 5-ring piston, standard bore size: 2.4775", compression ratio: 8.3:1
948cc engine (to October 1962)
Required: 1
+0.060" oversize. Specifications: 948cc. engine, 5-ring piston, standard bore size: 2.4775", compression ratio: 8.3:1
948cc engine (to October 1962)
Required: 1
standard size. Specifications: 1098cc. engine, 4-ring piston, standard bore size: 2.542", compression ratio: 8.9:1
With 1098cc. engine (October 1962 to October 1966)
Required: 4
+0.020" oversize. Specifications: 1098cc. engine, 4-ring piston, standard bore size: 2.542", compression ratio: 8.9:1
With 1098cc. engine (October 1962 to October 1966)
Required: 4
+0.030" oversize. Specifications: 1098cc. engine, 4-ring piston, standard bore size: 2.542", compression ratio: 8.9:1
With 1098cc. engine (October 1962 to October 1966)
Required: 4
+0.040" oversize. Specifications: 1098cc. engine, 4-ring piston, standard bore size: 2.542", compression ratio: 8.9:1
With 1098cc. engine (October 1962 to October 1966)
Required: 4
+0.060" oversize. Specifications: 1098cc. engine, 4-ring piston, standard bore size: 2.542", compression ratio: 8.9:1
1098cc. engine (October 1962 to October 1966)
Required: 4
standard size. Specifications: 1098cc. engine, 4-ring piston, standard bore size: 2.542", compression ratio: 8.9:1
1098cc. engine (October 1962 to October 1966)
Required: 1
+0.020" oversize. Specifications: 1098cc. engine, 4-ring piston, standard bore size: 2.542", compression ratio: 8.9:1
1098cc. engine (October 1962 to October 1966)
Required: 1
+0.030" oversize. Specifications: 1098cc. engine, 4-ring piston, standard bore size: 2.542", compression ratio: 8.9:1
1098cc. engine (October 1962 to October 1966)
Required: 1
+0.040" oversize. Specifications: 1098cc. engine, 4-ring piston, standard bore size: 2.542", compression ratio: 8.9:1
1098cc. engine (October 1962 to October 1966)
Required: 1
+0.060" oversize. Specifications: 1098cc. engine, 4-ring piston, standard bore size: 2.542", compression ratio: 8.9:1
1098cc. engine (October 1962 to October 1966)
Required: 1
Required: 4
oil gallery. Diameter: 1/2", total height: 3/8"
Required: 2
Required: 3
fuel pump to cylinder block
with 948cc engine to October 1962: Sprie to HAN6-24731, Midget to GAN1-16183
Required: 2
rear position
1098 cc with 10CG engine
Required: 1
rear - used item
from March 1964 to September 1966 with 10CC series engines with 1098 cc: Sprite from HAN8-38829 to HAN8-64734, Midget from GAN3-25788 to GAN3-52389
Required: 1
main bearing cap
Required: 6
crankshaft - with +0.005" oversize
948 cc
Required: 1
crankshaft - with +0.010" oversize
948 cc
Required: 1
crankshaft - 4 piece set in standard size
1098 cc with 10CC engine
Required: 1
crankshaft - 4 piece set with +0.003" oversize
1098 cc with 10CC engine
Required: 1
crankshaft - 4 piece set with +0.005" oversize
1098 cc with 10CC engine
Required: 1
crankshaft - 4 piece set with +0.030" oversize
1098 cc with 10CC engine
Required: 1
standard size. Identification: 1.185" journal width
with 948cc engine to October 1962: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 1
+ 0.010" over size. Identification: 1.185" journal width
with 948cc engine to October 1962: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 1
+ 0.020" over size. Identification: 1.185" journal width
with 948cc engine to October 1962: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 1
+ 0.030" over size. Identification: 1.185" journal width
with 948cc engine to October 1962: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 1
+ 0.040" over size. Identification: 1.185" journal width
with 948cc engine to October 1962: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 1
standard size - standard steel-backed aluminium alloy type. Feature: upper and lower half with groove and oil hole
1098 cc with 10CC engine
Required: 1
+0.010" oversize - standard steel-backed aluminium alloy type. Feature: upper and lower half with groove and oil hole
1098 cc with 10CC engine
Required: 1
+0.020" oversize - standard steel-backed aluminium alloy type. Feature: upper and lower half with groove and oil hole
1098 cc with 10CC engine
Required: 1
+0.030" oversize - standard steel-backed aluminium alloy type. Feature: upper and lower half with groove and oil hole
1098 cc with 10CC engine
Required: 1
+0.040" oversize - standard steel-backed aluminium alloy type. Feature: upper and lower half with groove and oil hole
1098 cc with 10CC engine
Required: 1
oil pump
to engine-no. 9C-H1168
Required: 1
rear main bearing cap
Tecalemit type
Required: 10
rear main bearing cap
Tecalemit type
Required: 1
oil pipe to cylinder block
Tecalemit type oil filter
Required: 1
Tecalemit type
Required: 1
Tecalemit type
Required: 1
948 cc and 1098 cc models with Tecalemit oil filter housing
Required: 1
Tecalemit type
Required: 1
948 cc
Required: 1
1098 cc
Required: 1
oil pump
Burman oil pump
Required: 1
Burman oil pump
Required: 1
Die original Ölpumpen von Burman und Hobourn sind nicht mehr lieferbar und werden durch die Ölpumpe 16280 ersetzt (Abb. 64).
Required: 2
with pin drive
The original burman and hobourn oil pumps are no longer available and are replaced by oil pump 16280
Required: 1
oil pump
Required: 1
oil pump
Required: 1
Tecalemit oil filter bowl
Required: 1
on oil filter bolt in Tecalemit oil filter bowl
Required: 1
oil filter - lower plate in Tecalemit oil filter bowl
Required: 1
oil sump, front - uprated neoprene replacement
Required: 2
Required: 1
oil pipe to cylinder block
Purolator type oil filter
Required: 1
Purolator type
Required: 1
oil filter head to cylinder block
Vehicle fitted with purolator type oil filter
Required: 2
between oil filter head and cylinder block - for vehicles with Purolator oil filter
Required: 1
Purolator type
Required: 1
Purolator type
Required: 1
oil pump
Required: 1
Required: 1
timing cover
Sprite I to engine no. 9C/U/H-37646 (April 1960)
Required: 1
at cylinder block
Alternative to screw plug
Required: 1
at cylinder block
Alternative to water drain tap
Required: 1
non-setting gasket and jointing compound
Required: 1
Content: 80 ml (€199.88 / 1000 ml)
Curil K2 - non hardening
Required: 1
Content: 60 ml (€198.33 / 1000 ml)
