Internal electrics - horn, relays and switches
dynamo. RF95 type with 9 screw-in terminals and two 35 ampere fuses
TC (1945-49), TD to chassis no. 8141 (1949-51)
Required: 1
for C39 and C40 dynamo. RB106 type with 5 screw-in terminals
TD from chassis no. 8142 (1951-53) and all TF (1953-55)
Required: 1
stop light and rear indicator. Reproduction of the Lucas type DB10 with modern electronics and 8 screw terminals
TA, TB, TC, TD and TF (1936-55)
Required: 1
2 fuse variant with 5 screw-in terminals. SF6 type without cover
TD from chassis no. 8142 (1951-53) and all TF (1953-55)
Required: 1
35 Ampere with 32 mm overall length and 6.2 mm diameter. Glass type
Required: 2
50 Ampere with 32 mm overall length and 6.2 mm diameter. Glass type
Required: 2
hydraulic switch with screw-in terminals and 1/8" x 27 NPTF thread
TD and TF (1949-55)
Required: 1
hydraulic switch with lucar terminals and 1/8" x 27 NPTF thread
TD and TF (1949-55)
Required: 1
replica of the FL5 flasher relay with 3 screw-in terminals and round housing
TA, TB, TC, TD and TF (1936-55)
Required: 1
headlamps - round FS22/1 type with screw-in terminals
TD from 18883 and TF (1953-55)
Required: 1
dip switch headlamps - LHD-Models
TD from 18883 and TF (1953-55)
Required: 1
dip switch headlamps - LHD-Models
TD from 18883 and TF (1953-55)
Required: 1
for starter switch and starter motor
TD and TF (1949-55)
Required: 2
high note - alloy cast horn with domed cover. 12 volt with 2 wire terminals
TD and TF (1949-55)
Required: 1
low note - alloy cast horn with domed cover. 12 volt with 2 wire terminals
TD and TF (1949-55)
Required: 1
for original horn
TD and TF (1949-55)
Required: 1