Differential and propshaft - TD and TF (1949-55)
Required: 1
differential bearing. Thickness: 0.496"
differential bearing. Thickness: 0.497"
differential bearing. Thickness: 0.498"
differential bearing. Thickness: 0.50"
differential bearing. Thickness: 0.501"
differential bearing. Thickness: 0.502"
differential bearing. Thickness: 0.503"
differential bearing. Thickness: 0.505"
5.125:1 ratio
Required: 1
crown wheel to differential carrier - BSF
TD to chassis no. 12284 (1949-51)
Required: 1
crown wheel to differential carrier - UNF
TD from chassis no. 12285 and all TF (1951-55)
Required: 8
Required: 2
Required: 2
planet gear
Required: 2
shaft planet gear
Required: 1
pinion - two piece kit with front and rear bearing
Required: 1
pinion
Required: 1
retaining drive flange - BSF
TD to chassis no. 12284 (1949-51)
Required: 1
retaining drive flange - UNF
TD from chassis no. 12285 and all TF (1951-55)
Required: 1
pinion adjusting. Thickness: 0.119"
pinion adjusting. Thickness: 0.121"
pinion adjusting. Thickness: 0.124"
pinion adjusting. Thickness: 0.125"
pinion adjusting. Thickness: 0.127"
pinion adjusting. Thickness: 0.128"
rear axle - BSF
TD to chassis no. 12284 (1949-51)
Required: 1
rear axle - UNF
TD from chassis no. 12285 and all TF (1951-55)
Required: 1
rear axle - UNF
TD from chassis no. 12285 and all TF (1951-55)
Required: 10
greaseable type with 62 mm span width and 24 mm cup diameter
Required: 2
sealed type with 62 mm span width and 24 mm cup diameter
Required: 2
with nuts for retainingg the propshaft. Includes: 4 bolts and 4 matching nuts with BSF thread
TD to chassis no. 12284 (1936-51)
Required: 2
retaining propshaft - UNF
TD from chassis no. 12285 and all TF (1951-55)
Required: 8
retaining propshaft - UNF
TD from chassis no. 12285 and all F (1951-55)
Required: 8
greaseable type with 62 mm span width and 24 mm cup diameter
Required: 2