Gearbox - outer
exchange. Identify by bottom mounted starter motor, first motion shaft for 10 splined clutch and no rear propshaft flange
1500 to engine no. 15GB-51767
Required: 1
reconditioned, in exchange. Identified by top mounted starter motor, first motion shaft for 10 splined clutch and rear propshaft flange
1500 with 15GB engine (from January 1959), all 1600, 1622, Twin Cam and De Luxe, 1622 to engine no. 16GC-3828
Required: 1
reconditioned, in exchange. Identified by top mounted starter motor, first motion shaft for 23 splined clutch and rear propshaft flange
1622 from engine no. 16GC-3829
Required: 1
- main casing with bell housing
1500 to engine no. 15GB-51767
Required: 1
- main casing with bell housing
1500 from engine no. 15GD-101, all 1600, 1622, Twin Cam and De Luxe
Required: 1
front
1500 from engine no. 15GD-101, all 1600, 1622, Twin Cam and De Luxe
Required: 1
gearbox front cover
1500 from engine no. 15GD-101, all 1600, 1622, Twin Cam and De Luxe
Required: 1
gearbox front cover
1500 from engine no. 15GD-101, all 1600, 1622, Twin Cam and De Luxe
Required: 1
Required: 1
side
Required: 1
side cover to casing - BSF thread
To gearbox no. A915
Required: 3
side cover to casing - UNC thread
From gearbox no. A916
Required: 3
side cover to casing - BSF thread
To gearbox no. A915
Required: 7
side cover to casing - UNC thread
From gearbox no. A916
Required: 7
oil drain
1500 from engine no. 15GD-101, all 1600, 1622, Twin Cam and De Luxe
Required: 1
distributor and oil pump spindle bore and control shaft boss - original type
Required: 1
control shaft boss - replica without female hex hole
Required: 1
- rear extension
1500 to engine no. 15GB-51767
Required: 1
- rear extension
1500 from engine no. 15GD-101, all 1600, 1622, Twin Cam and De Luxe
Required: 1
rear extension
Required: 1
gear lever gaiter - made from stainless steel
Required: 1
- new item
May replaced by used housing 317804 if not available
Required: 1
remote control housing to rear extension - length: 2.3/4"
Required: 2
remote control housing to rear extension - length: 1.1/8"
Required: 2
for plunger in control remote housing
Required: 1
in control remote housing
Required: 1
remote control housing
Required: 1
speedometer pinion
Required: 1
Required: 1
rear extension
1500 to engine no. 15GB-10989
Required: 1
rear extension - dimensions: 35 x 56 x 28 mm
1500 to engine no. 15GB-10989
Required: 1
rear extension
1500 from engine no. 15GB-10990 to 15GB-51767
Required: 1
rear extension - dimensions: 35 x 50 x 9 mm
1500 from engine no. 15GB-10990 to 15GB-51767
Required: 1
rear extension
1500 from engine no. 15GD-101, all 1600, 1622, Twin Cam and De Luxe
Required: 1
for gearbox end ball bearing
1500 from engine no. 15GD-101, all 1600, 1622, Twin Cam and De Luxe
Required: 1
rear extension - dimensions: 35 x 64 x 13 mm
1500 from engine no. 15GD-101, all 1600, 1622, Twin Cam and De Luxe
Required: 1
rear extension
1500 from engine no. 15GD-101, all 1600, 1622, Twin Cam and De Luxe
Required: 1
1500 from engine no. 15GD-101, all 1600, 1622, Twin Cam and De Luxe
Required: 1
1500 from engine no. 15GD-101, all 1600, 1622, Twin Cam and De Luxe
Required: 1
selector shaft - rear
Required: 1
for release lever bush
Used with original split type bush
Required: 1
release lever to shaft
Required: 2
in rear extension
Required: 1
selector shaft - front
Required: 1
selector shaft - front
Required: 1
in remote control housing
Required: 1
selector shaft - rear
Required: 1
3rd and 4th speed
To gearbox no. A289
Required: 1
3rd and 4th speed
From gearbox no. A290
Required: 1
reverse speed
To gearbox no. A289
Required: 1
3rd and 4th speed
To gearbox no. A289
Required: 1
3rd and 4th speed
From gearbox no. A290
Required: 1
for selector shaft 3rd and 4th speed
From gearbox no. A290
Required: 1
reverse speed
To gearbox no. A289
Required: 1
selector shaft locating
To gearbox no. A289
Required: 1
reverse speed
To gearbox no. A289
Required: 1
reverse speed
From gearbox no. A290
Required: 1
3rd and 4th speed
To gearbox no. A289
Required: 1
3rd and 4th speed
From gearbox no. A290
Required: 1
1st and 2nd speed
To gearbox no. A289
Required: 1
1st and 2nd speed - new item
From gearbox no. A290
Required: 1
1st and 2nd speed - used item
From gearbox no. A290
Required: 1
reverse selector lever
In remote control housing
Required: 1
reverse selector lever
In remote control housing
Required: 1
reverse selector lever
In remote control housing
Required: 1
