Solid axle - Twin Cam and de Luxe
rebound strap. Must be welded to the rear axle casing
Required: 2
Differential carrier to axle casing
Required: 10
LH brake caliper to rear axle
Required: 1
RH brake caliper to rear axle
Required: 1
Required: 2
differential
Required: 1
Required: 1
differential - identified by 10 inner splines and 16 outer splines
To chassis no. 2370
Required: 2
differential - identified by 26 inner splines and 16 outer splines
From chassis no. 2371
Required: 2
planet gear shaft
Required: 1
wheel bearing
Part of our wheel bearing kit 3956 (ill. 50)
Required: 2
rear axle
Part of our wheel bearing kit 3956 (ill. 50)
Required: 2
wheel bearing
Required: 2
brake disc to wheel bearing housing
Required: 8
hub to wheel bearing housing
Required: 8
hub
Required: 2
LH
Required: 1
RH
Required: 1
with new crown wheel and pinion. Ratio: 3.9:1 (10/39 teeth) - reconditioned, in exchange
Required: 1
exchange - ratio: 4.1:1 (10/41 teeth)
Supplied with new crown wheel and pinion
Required: 1
exchange - ratio: 4.3:1 (10/43 teeth). Half shaft with 10 splines
Supplied with new crown wheel and pinion
Required: 1
exchange - ratio: 4.3:1 (10/43 teeth). Half shaft with 26 splines
Supplied with new crown wheel and pinion
Required: 1
exchange - ratio: 4.55:1 (9/41 teeth)
Supplied with new crown wheel and pinion
Required: 1
