Instruments RHD - to August 1971
GD1501/01 - new item with 52 mm diameter, black with white illumination and clear glass, chrome bezel, oil range: 0-100 PSI, water range: 90-230 °F, mechanical with capillary, external lit
To October 1964
Required: 1
GD1501/14 - new item with 52 mm diameter, black with white illumination and clear glass, chrome bezel, oil range: 0-100 LBS, water range: 90-230 °F, mechanical with capillary, external lit
October 1964 to May 1966
Required: 1
GD1501/14A - new item with 52 mm diameter. Black dial with white illumination and clear glass, chrome bezel, oil range: 0-100 LBS, water range: 90-230 °F, mechanical with capillary, external lit
May 1966 to November 1967
Required: 1
GD1301/19 - 52 mm diameter, black with white illumination and clear glass, chrome bezel, oil range: 0-100 PSI, water range: 90-230 F°, mechanical, internal lit. Reconditioned, in exchange
November 1967 to September 1969
Required: 1
GD1301/21 - new item with 52 mm diameter. Black with white illumination and clear glass, chrome bezel, oil pressure range: 0-100 PSI, water temperature range: C-N-H, mechanical with capillary, internal lit
From September 1969
Required: 1
for gauges with studs with 3BA thread - in aluminium with 3/8" outer diameter
Required: 2
for gauges with studs with 3BA thread - in brass with 3/8" outer diameter
Required: 2
cylinder block to oil pipe - braided with zinc plated wire
Required: 1
Required: 1
outer diameter: 24 mm, for 17 mm hole and 4 mm cable
Required: 1
SN6125/04 - MP/H, non overdrive - exchange
To October 1964
Required: 1
SN6125/06 - MP/H, overdrive - exchange
To October 1964
Required: 1
for gauges with studs with 3BA thread - in aluminium with 1/2" outer diameter
To October 1964
Required: 2
for gauges with studs with 3BA thread - in brass with 1/2" outer diameter
To October 1964
Required: 2
SN6125/04A - MP/H, non overdrive - exchange
October 1964 to December 1964
Required: 1
SN6125/06A - MP/H, overdrive - exchange
October 1964 to December 1964
Required: 1
SN6144/00 model with 100 mm diameter, with black dial, black print and chrome bezel. Range: 0-120 MP/H, turns: 1040, final ratio: 3.909:1 - reconditioned, in exchange
MGB without Overdrive from December 1964 to November 1967 - Roadster from GHN3-48767 to GHN3-138360, GT from GHD3-71933 to GHD3-137795
Required: 1
SN6144/00 model with 100 mm diameter, with black dial, black print and chrome bezel. Range: 0-120 MP/H, turns: 1040, final ratio: 3.909:1 - new item
MGB without Overdrive from December 1964 to November 1967 - Roadster from GHN3-48767 to GHN3-138360, GT from GHD3-71933 to GHD3-137795
Required: 1
SN6144/02 model with 100 mm diameter, with black dial, black print and chrome bezel. Range: 0-120 MP/H, turns: 1020, final ratio: 3.909:1 - new item
MGB with Overdrive from December 1964 to November 1967 - Roadster from GHN3-48767 to GHN3-138360, GT from GHD3-71933 to GHD3-137795
Required: 1
SN6144/20 - MP/H, non overdrive - exchange
From November 1967
Required: 1
SN6144/23 - MP/H, overdrive - exchange
From November 1967
Required: 1
SN6144/20 - MP/H, automatic - exchange
November 1967 to September 1968
Required: 1
SN6144/28 - MP/H, automatic - exchange
From September 1968
Required: 1
for gauges with studs with 3BA thread - in aluminium with 1/2" outer diameter
From October 1964
Required: 2
for gauges with studs with 3BA thread - in brass with 1/2" outer diameter
From October 1964
Required: 2
with 48" length
To April 1963, non overdrive
Required: 1
with 57" length
RHD models with Overdrive to April 1963 (Roadster to GHN3-9402)
Required: 1
speedometer - length: 47", non overdrive
April 1963 to November 1967
Required: 1
with 60" length
April 1963 to November 1967
Required: 1
speedometer - length: 42", non overdrive
From November 1967
Required: 1
with 57" length
RHD models with Overdrive from November 1967 (Roadster from GHN4-138401 and GT from GHD4-139471)
Required: 1
speedometer - length: 47", automatic
From November 1967
Required: 1
for positive earthed cars
To November 1967
Required: 1
for negative earthed cars
From November 1967
Required: 1
serial no.: RN2312/01, drive: mechanical, chrome bezel, diameter: 4" - reconditioned. This item is sold on an exchange basis
To October 1964
Required: 1
for gauges with studs with 3BA thread - in aluminium with 1/2" outer diameter
To October 1964
Required: 2
for gauges with studs with 3BA thread - in brass with 1/2" outer diameter
To October 1964
Required: 2
RVI2401/00, drive: electric, chrome bezel, diameter: 4". For cars with positive earth - reconditioned, in exchange
October 1964 to November 1967
Required: 1
serial no. RVI2401/00, drive: electric, chrome bezel, diameter: 4". For cars with negative earth - reconditioned. This item is sold on an exchange basis
MGB from October 1964 to November 1967: Roadster from GHN3-48767 to GHN3-138360, GT to GHD137795
Required: 1
electronic rev counter RVI2401/00 with 4" diameter for cars with negative earth. Black dial with white printing and flat glass, chrome bezel, range: 0-7000 RPM - new item
MGB from October 1964 to November 1967: Roadster from GHN3-48767 to GHN3-138360, GT to GHD137795
Required: 1
RVI2430/00, electric, negative earth - exchange
From November 1967
Required: 1
serial no. RVI2418/00, drive: electric, chrome bezel, diameter: 4". New item for cars with negative earth
From November 1967
Required: 1
and mounting bracket for 'RVI' tachometer field winding. Please note: The cable shown in the photo as well as nut and washers are not included in the scope of delivery
From October 1964
Required: 1
for gauges with studs with 3BA thread - in aluminium with 1/2" outer diameter
From October 1964
Required: 2
FG2530/63. 52 mm auxiliary gauge with black dial, chrome bezel and hanging pointer. Range: E-1/2-F - reconditioned, in exchange
MGB Roadster to GHN3-48766 (to October 1964)
Required: 1
BF2300/02 - exchange
October 1964 to November 1967
Required: 1
electrical petrol gauge BF2226/00with 52 mm diameter. Black dial with white illumination, hanging pointer and chrome bezel. Range: E-1/2-F - reconditioned, in exchange
From November 1967
Required: 1
for gauges with studs with 3BA thread - in aluminium with 3/8" outer diameter
Required: 1
for gauges with studs with 3BA thread - in brass with 3/8" outer diameter
Required: 1
speedometer cable
Roadster and GT with D-type overdrive (to November 1967), all Roadster and GT with non overdrive gearbox
Required: 1
round, chromed variant with 4" diameter. Fits to speedometer and tachometer
Required: 2
GD1301/64 - new item with 52 mm diameter. Black with white illumination and clear glass, chrome bezel, oil pressure range: 0-100 PSI, water temperature range: 90-230 °F, mechanical with capillary, internal lit
More new Smiths gauges
Required: 1
