Brake pipes - dual line front/rear split
retaining brake hose to subframe front right hand
one side plain, alternative lock nut 5356 could be used
Required: 1
retaining brake hose to subframe front left hand
Required: 1
3/8", between union and brake hose end - subframe front right hand
Required: 1
7/16", between and banjo bolt - subframe front right hand
Required: 1
subframe front right hand - 2-way, fittings 90°
alternative connector 307625 could be fitted
Required: 1
subframe front right hand - 2-way, fittings 180°
alternative connector 8211 could be fitted
Required: 1
for brake pipes, female, metric
if fitted
Required: 1
assembly, fitted on bulkhead
LHD only, upto 1975
Required: 1
pressure failure on vehicles with dual line braking system - identified by 3/8"-24 UNF thread
LHD only, upto 1975
Required: 1
for rear brake, fitted on bulkhead
all RHD and LHD 1975 on
Required: 1
3/8" x 24 UNF - for 3/16" pipe
all RHD and LHD 1975 on
Required: 1
retaining brake hose to radius arm and subframe
Required: 6
right to left - fitted an front site of front subframe
Required: 1
bridge between front wheel cylinders
if brake drums on front
Required: 2
LH steering, with front disc brake and brake servo
Cooper S MK2/3 with hydrolastic suspension
Required: 1
RH steering, with front disc brake and brake servo
Cooper S MK2/3 with hydrolastic suspension
Required: 1
for LHD models
front to rear split type dual line brakes without brake servo (1980-89)
Required: 1
RH steering, with front drum or disc brake, without brake servo
upto 1989
Required: 1
LH steering, with front disc brake and inline brake servo
1989 on
Required: 1
RH steering, with front disc brake and inline brake servo
1989 on
Required: 1
Aeroquip type, set with 4 lines, front and rear
if brake drums on front
Required: 1
stainless steel braided, set with 4 lines
all models with front disc brakes
Required: 1
stainless steel braided and black coated, set with 4 lines
all models with front disc brakes
Required: 1
