SU-HS2 internal carburettor
with piston
only if spring loaded metring needle
Required: 1
fixed type - marked: EB
848 cc upto 1971
carburettor type: AUD13, AUD912, AUD976, AUD299, AUD359
Required: 1
fixed type - marked: GX - standard mixture
998 cc upto 1971
carburettor type: AUD86, AUD298, AUD363
Required: 1
fixed type - marked: GG
upto 1971
carburettor type: AUD13, AUD912, AUD976, AUD299, AUD359, AUD86, AUD298, AUD363
Required: 1
fixed type - marked: M - rich mixture
upto 1971
carburettor type: AUD13, AUD912, AUD976, AUD299, AUD359, AUD86, AUD298, AUD363
Required: 1
spring loaded type - marked: AAV - standard mixture
848 cc, 998 cc 1971 upto 1974
carburettor type: AUD449, AUD509, AUD587
Required: 1
for spring loaded metering needle
848 cc, 998 cc 1971 upto 1974
Required: 1
spring loaded metering needle
848 cc, 998 cc 1971 upto 1974
Required: 1
for SU-HS2 carburettors - supplied with float
Required: 1
for SU HS type carburettor - uprated 'unsinkable' type, made from closed cell Nitrile rubber foam, resistant to modern ethanol based fuels
Required: 1
for SU carburettors - bore: 0.070"
alternative grose jet 19687 could be used
Required: 1
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
alternative for needle valve 16334
Required: 1
float chamber
Required: 1
carburettor - diameter: 0.090". Identification: red marking sleeve
Required: 1
assembly. For SU-HS carburettors with fixed metering needle
up to 1971
carburettors with fixed needle
Required: 1
assembly - coarse thread
1971 up to 1974
carburettors with spring loaded needle
Required: 1
assembly. SU-HS carburettors with spring loaded needle, variant with fine threat
1971 up to 1974
carburettors with spring loaded needle, alternative for kit 8143
Required: 1
coarse thread
upto 1971
carburettors with fixed needle
Required: 1
coarse thread
1971 upto 1974
carburettors with spring loaded needle
Required: 1
main jet - coarse thread
for mixture adusting
Required: 1
main jet - fine thread
for kit 1434 only
for mixture adusting
Required: 1
throttle spindle. For bodies with worn cast in bushes, useable on SU HS2 carburettors with 5/16" throttle spindle
For bodies with worn cast in bushes. Ream body boses to 8.0 mms
Required: 1
for one SU-HS2 type carburettor. Comprising service kit 214274 plus throttle disc and throttle spindle
Required: 1
€36.00
