Block components 1098 cc A series
for higher oil pressure
use together with spring 9240
Required: 1
for higher oil pressure
use together with ball 327229
Required: 1
oil gallery. Diameter: 1/2", total height: 3/8"
alternatives
Required: 2
for water drain tap - 3/32" thick
alternatives
Required: 1
for water drain tap - 1/16" thick
alternatives
Required: 1
with breather pipe
Early models
could be replaced by side cover 8253
Required: 1
oil pipe
only on cars without if oil pressure switch 14956
Required: 1
if tube 8294 is fitted
Required: 1
use together with dipstick tube 327237
Required: 1
dipstick - metal
use together with dipstick 306704
Required: 1
filter to block, use with oil filter element
use bolt 6511 if not available
Required: 2
filter to block, use with oil filter element
replaces stud 298337
Required: 2
cylinder head - short
5 if stud 306181 to hold coil bracket is not fitted
Required: 4
cylinder head - medium
if coil bracket fitted to cylinder head
Required: 1
main bearing cap
Required: 6
distributor drive, variant with groove for 'O' ring
Required: 1
upto engine no. 10H/791
engines without timing chain tensioner
Required: 1
from engine no. 10H/791 on
engines with timing chain tensioner
Required: 1
non-setting gasket and jointing compound
Content: 80 ml (€199.88 / 1000 ml)
