Crankshaft 1275 cc A series
new item, A+ series, also replacement for A series, casting: CAM6232
also replacement for A series, casting: CAM6232
Required: 1
without bearings
Required: 1
standard size - standard steel-backed aluminium alloy type. Feature: upper and lower half with groove and oil hole
Required: 1
+0.010" oversize - standard steel-backed aluminium alloy type. Feature: upper and lower half with groove and oil hole
Required: 1
+0.020" oversize - standard steel-backed aluminium alloy type. Feature: upper and lower half with groove and oil hole
Required: 1
+0.030" oversize - standard steel-backed aluminium alloy type. Feature: upper and lower half with groove and oil hole
Required: 1
+0.040" oversize - standard steel-backed aluminium alloy type. Feature: upper and lower half with groove and oil hole
Required: 1
+0.060" oversize - standard steel-backed aluminium alloy type. Feature: upper and lower half with groove and oil hole
Required: 1
standard size - heavy duty steel-backed cast copper lead type. Feature: ipper and lower half with groove and oil hole
Required: 1
+0.010" oversize - heavy duty steel-backed cast copper lead type. Feature: upper and lower half with groove and oil hole
Required: 1
+0.020" oversize - heavy duty steel-backed cast copper lead type. Feature: upper and lower half with groove and oil hole
Required: 1
+0.030" oversize - heavy duty steel-backed cast copper lead type. Feature: upper and lower half with groove and oil hole
Required: 1
+0.040" oversize - heavy duty steel-backed cast copper lead type. Feature: upper and lower half with groove and oil hole
Required: 1
+0.060" oversize - heavy duty steel-backed cast copper lead type. Feature: upper and lower half with groove and oil hole
Required: 1
crankshaft - 4 piece set in standard size
Required: 1
crankshaft - 4 piece set with +0.003" oversize
Required: 1
crankshaft - 4 piece set with +0.005" oversize
Required: 1
crankshaft - 4 piece set with +0.030" oversize
Required: 1
could be replaced by set 306390
Required: 4
set of 4
A-plus series, also replacement for A series
Required: 1
high grade 8470 chrome moly with a tensile strength of 220.000 psi ensure substantial strength and reduce stretching - supplied in sets of 8 plus nuts
Required: 1
Standard, steel-backed aluminium alloy
Required: 1
+ 0.010", steel-backed aluminium alloy
Required: 1
+ 0.020", steel-backed aluminium alloy
Required: 1
+ 0.030", steel-backed aluminium alloy
Required: 1
+ 0.040", steel-backed aluminium alloy
Required: 1
Standard, steel-backed cast copper lead
Required: 1
+ 0.010", steel-backed cast copper lead
Required: 1
+ 0.020", steel-backed cast copper lead
Required: 1
+ 0.030", steel-backed cast copper lead
Required: 1
+ 0.040", steel-backed cast copper lead
Required: 1
new item - Oilpump with stardrive
oilpump with stardrive
Required: 1
for oil pump with star drive
Required: 1
tuftride hardened - length: 39.59 mm
alternatives
Required: 8
Duplex timing chain
Required: 1
engine plate to maincap
Duplex timing chain
Required: 2
uprated double row endless chain with 52 pitches
Required: 1
with oilseparator
Duplex timing chain
Required: 1
engine 12H/706AA/3997 on
Simplex timing chain with tensioner
Required: 1
Engine front plate
engine 12H/706AA/3997 on
Simplex timing chain with tensioner
Required: 1
engine plate to main bearing cap
engine 12H/706AA/3997 on
Simplex timing chain with tensioner
Required: 2
engine 12H/706AA/3997 on
Simplex timing chain with tensioner
Required: 4
engine plate to block
engine 12H/706AA/3997 on
Simplex timing chain with tensioner
Required: 2
single row
engine 12H/706AA/3997 on
Simplex timing chain with tensioner
Required: 1
single row
timing chain with tensioner from engine 12H/706AA/3997
Required: 1
uprated single row endless chain with 52 pitches
timing chain with tensioner from engine 12H/706AA/3997
Required: 1
single row
engine 12H/706AA/3997 on
Simplex timing chain with tensioner
Required: 1
timing chain tensioner
engine 12H/706AA/3997 on
Simplex timing chain with tensioner
Required: 1
engine 12H/706AA/3997 on
Simplex timing chain with tensioner
Required: 1
for tensioner pad
engine 12H/706AA/3997 on
Simplex timing chain with tensioner
Required: 1
3/4" x 5/16" UNF
engine 12H/706AA/3997 on
Simplex timing chain with tensioner
Required: 1
for tensioner mounting
engine 12H/706AA/3997 on
Simplex timing chain with tensioner
Required: 1
for tensioner mounting
engine 12H/706AA/3997 on
Simplex timing chain with tensioner
Required: 1
with oilseparator
engine 12H/706AA/3997 on
Simplex timing chain with tensioner
Required: 1
timing cover
engine 12H/706AA/3997 on
Simplex timing chain with tensioner
Required: 1
3/4" x 5/16" UNF
if Simplex timing chain is fitted only 4 screws required
Required: 5
standard size. Specifications: 1275 cc engine, 4-ring piston, standard bore size: 2.780", compression ratio: 8.8:1
CR 8.8:1
dished
Required: 1
+0.020" oversize. Specifications: 1275 cc engine, 4-ring piston, standard bore size: 2.780", compression ratio: 8.8:1
CR 8.8:1
dished
Required: 1
+0.030" oversize. Specifications: 1275 cc engine, 4-ring piston, standard bore size: 2.780", compression ratio: 8.8:1
CR 8.8:1
dished
Required: 1
+0.040" oversize. Specifications: 1275 cc engine, 4-ring piston, standard bore size: 2.780", compression ratio: 8.8:1
CR 8.8:1
dished
Required: 1
+0.060" oversize. Specifications: 1275 cc engine, 4-ring piston, standard bore size: 2.780", compression ratio: 8.8:1
CR 8.8:1
dished
Required: 1
standard, for 4 ring piston
compression rings = 0.0625", oil ring = 0.1562"
Required: 1
+ 0.020", for 4 ring piston
compression rings = 0.0625", oil ring = 0.1562"
Required: 1
+ 0.030", for 4 ring piston
compression rings = 0.0625", oil ring = 0.1562"
Required: 1
+ 0.040", for 4 ring piston
compression rings = 0.0625", oil ring = 0.1562"
Required: 1
+ 0.060", for 4 ring piston
compression rings = 0.0625", oil ring = 0.1562"
Required: 1
standard size. Specifications: 1275 cc engine, 3-ring piston, standard bore size: 2.780", compression ratio: 8.8:1
CR 8.8:1
dished
Required: 1
+0.020" oversize. Specifications: 1275 cc engine, 3-ring piston, standard bore size: 2.780", compression ratio: 8.8:1
CR 8.8:1
dished
Required: 1
+0.030" oversize. Specifications: 1275 cc engine, 3-ring piston, standard bore size: 2.780", compression ratio: 8.8:1
CR 8.8:1
dished
Required: 1
+0.040" oversize. Specifications: 1275 cc engine, 3-ring piston, standard bore size: 2.780", compression ratio: 8.8:1
CR 8.8:1
dished
Required: 1
standard, for 3 ring piston
compression rings = 0.0591", oil ring = 0.1575"
Required: 1
+ 0.020 overzize", for 3 ring piston - compression rings = 0.0591", oil ring = 0.1575"
compression rings = 0.0591", oil ring = 0.1575"
Required: 1
+ 0.030", for 3 ring piston
compression rings = 0.0591", oil ring = 0.1575"
Required: 1
+ 0.040", for 3 ring piston
compression rings = 0.0591", oil ring = 0.1575"
Required: 1
+ 0.060", for 3 ring piston
compression rings = 0.0591", oil ring = 0.1575"
Required: 1
standard size. Specifications: 1275cc. engine, 3-ring piston, standard bore size: 2.780", compression ratio: 9.75:1
CR 9.7:1
dished
Required: 1
+ 0.020", 3 rings
CR 9.7:1
dished
Required: 1
+ 0.030", 3 rings
CR 9.7:1
dished
Required: 1
+ 0.040", 3 rings
CR 9.7:1
dished
Required: 1
+ 0.060", 3 rings
CR 9.7:1
dished
Required: 1
standard size. Specifications: 1275 cc. engine - 3-ring piston (0.0591" compression rings and 0.1181" oil ring) and 9.75:1 compression ratio, standard bore size: 2.78"
Required: 1
+0.010" oversize. Specifications: 1275 cc. engine - 3-ring piston (0.0591" compression rings and 0.1181" oil ring) and 9.75:1 compression ratio, standard bore size: 2.78"
Required: 1
+0.020" oversize. Specifications: 1275 cc. engine - 3-ring piston (0.0591" compression rings and 0.1181" oil ring) and 9.75:1 compression ratio, standard bore size: 2.78"
Required: 1
+0.030" oversize. Specifications: 1275 cc. engine - 3-ring piston (0.0591" compression rings and 0.1181" oil ring) and 9.75:1 compression ratio, standard bore size: 2.78"
Required: 1
+0.040" oversize. Specifications: 1275 cc. engine - 3-ring piston (0.0591" compression rings and 0.1181" oil ring) and 9.75:1 compression ratio, standard bore size: 2.78"
+0.060" oversize. Specifications: 1275 cc. engine - 3-ring piston (0.0591" compression rings and 0.1181" oil ring) and 9.75:1 compression ratio, standard bore size: 2.78"
standard, for 3 ring piston
compression rings = 0.0591", oil ring = 0.1181"
Required: 1
+ 0.020", for 3 ring piston
compression rings = 0.0591", oil ring = 0.1181"
Required: 1
+ 0.040", for 3 ring piston
compression rings = 0.0591", oil ring = 0.1181"
Required: 1
+ 0.060", for 3 ring piston
compression rings = 0.0591", oil ring = 0.1181"
Required: 1
distributor drive, variant with groove for 'O' ring
Required: 1
crankshaft pulley attachment
upto engine 12H/389AA/236 12H/390N/H827 12H/390AA/H103
Required: 1
crankshaft pulley attachment
engine 12H/389AA/237 on 12H/390N/H828 on 12H/390AA/H104 on
Required: 1
