Cylinder head 1275 cc A-plus series carburettor SPI up to 1997
from conversions, looks like new
Required: 1
with stud
only eng.no.: 12A2F53... and 12A2G01...
Required: 2
genuine type with 14,28 mm diameter
alternatives
Required: 1
reproduction with 14,28 mm diameter
alternatives
Required: 1
bronce, Inlet and exhaust valve
alternative for 8318
Required: 8
with 33.2 mm head diameter and 90.7 mm total length - identified by triple collet groove
Required: 4
with 35.7 mm head diameter and 90.7 mm total length - identified by triple collet groove
Required: 4
with 29.4 mm head diameter and 90.7 mm total length - identified by triple collet groove
Required: 4
top
for valves with triple collet groove
Required: 8
oil gallery. Diameter: 1/2", total height: 3/8"
Required: 1
thermostat housing - uprated, made from high quality 1.5 mm gasket material, extremepressure resistant to 750 psi
alternative
Required: 2
cars with CR 9.4:1 and HIF38 carburettor
Required: 1
Cooper cars with CR 10.1:1 and HIF44 carburettor
Required: 1
1.3 Spi Japanese modells only 1997 on
Required: 1
Thermostat housing (lower)
cars with CR 9.4:1 and HIF38 carburettor
Required: 1
thermostat housing (lower)
Cooper cars with CR 10.1:1 and HIF44 carburettor
Required: 1
thermostat housing (lower)
single point injection cars
Required: 1
for bypass hose
only engine G03, G04, G05, J04, J05, J06
Required: 1
water pump
only engine G03, G04, G05, J04, J05, J06
easy fitting
Required: 1
hose to adaptor
only engine G03, G04, G05, J04, J05, J06
Required: 2
large port specification
if LCB-Manifold fitted or bigger ports
Required: 1
for inlet-/ outletmanifold
single point injection cars
Required: 6
classic copper gasket on metal layer for engines up to 1340 cc
alternatives
Required: 1
classic soft material gasket on metal layer
Required: 1
classic soft material gasket on metal layer with special sealing ring for the oil feed
alternatives
Required: 1
not single point injection cars
only used if no heating tap/water outlet is mounted
Required: 1
1/4" UNF, 3/8" AF spannersize
not single point injection cars
Required: 2
non-setting gasket and jointing compound
Required: 1
Content: 80 ml (€199.88 / 1000 ml)
with classic soft material head gasket on metal layer
1275 cc models with single SU-HIF44 carburettor (1990-97)
Required: 1
with classic soft material head gasket on metal layer
1275 cc models with single SU-HIF44 carburettor (1990-97)
Required: 1
with classic soft material head gasket on metal layer
1.3 Spi (1992-97)
Required: 1
