Cylinder head 1275 cc A series
without breather
from conversions, looks like new
Required: 1
genuine type with 14,28 mm diameter
alternatives
Required: 1
reproduction with 14,28 mm diameter
alternatives
Required: 1
for adjusting screw
could be used alternative for 8612
Required: 1
in rocker arm
for rocker arm 203122
Required: 8
rocker arm - 5/16" UNF
for rocker arm 203122
Required: 8
rocker arm adjusting srew, 5/16" UNF
for rocker arm 203122
Required: 8
rocker arm - 1/4" UNF
alternative, if threat smaller than 5/16"
Required: 8
rocker arm adjusting screw - 1/4" UNF
alternative, if threat smaller than 5/16"
Required: 8
pressed steel, used items
could be replaced by rocker arm 7020
Required: 8
rocker arm - 1/4" UNF
for rocker arm 310889
Required: 8
rocker arm adjusting screw - 1/4" UNF
for rocker arm 310889
Required: 8
sintered
could be used as replacement for rocker arms 203122 and 310889
Required: 8
rocker arm adjusting screw - 5/16" UNF
for rocker arm 7020
Required: 8
bronce, Inlet and exhaust valve
alternative for 8318
Required: 8
diameter: 33,4 mm length: 90,9 mm
Indentification: small collet groove
Required: 4
diameter: 35,76 mm length: 90,68 mm
only cars with twin carbs
Indentification: small collet groove
Required: 4
diameter: 29,44 mm length: 90,8 mm
Indentification: small collet groove
Required: 4
inner spring, lower
only cars with twin carbs
only if double spring set 18832 fitted
Required: 8
double, inner/outer - 16 pieces
only cars with twin carbs
Required: 1
standard
inlets
could be used for exhaust optional
Required: 4
for exhaust valve. Hardened variant for lead free applications - dimensions: 1.256 x 0.996 x 0.250"
Required: 4
oil gallery. Diameter: 1/2", total height: 3/8"
Required: 1
for bypass hose
also used by cast iron water pumps
Required: 1
large port specification
if LCB-Manifold fitted or bigger ports
Required: 1
classic copper gasket on metal layer for engines up to 1340 cc
alternatives
Required: 1
classic soft material gasket on metal layer
Required: 1
classic soft material gasket on metal layer with special sealing ring for the oil feed
alternatives
Required: 1
non-setting gasket and jointing compound
Required: 1
Content: 80 ml (€199.88 / 1000 ml)
with classic soft material head gasket on metal layer with special sealing ring for the oil feed
alternatives
Required: 1
with classic copper gasket on metal layer
alternatives
Required: 1
