Cylinder head Cooper S 970 cc, 1070 cc & 1275 cc
without breather
may be small grooves must done to side for the additional headbolts
Required: 1
without breather
from conversions, looks like new
Required: 1
for 11 bolt cylinder head
Indentification: small grooves for head bolt 10 + 11 on left and right side
Required: 1
made from cork
could be used alternative for gasket 305080
Required: 1
genuine type with 14,28 mm diameter
alternatives
Required: 1
reproduction with 14,28 mm diameter
alternatives
Required: 1
for adjusting screw
could be used alternative for 8612
Required: 1
in rocker arm
Required: 8
rocker arm - 5/16" UNF
for rocker arm 203122
Required: 8
rocker arm adjusting srew, 5/16" UNF
for rocker arm 203122
Required: 8
rocker arm - 1/4" UNF
alternative, if threat smaller than 5/16"
Required: 8
rocker arm adjusting screw - 1/4" UNF
alternative, if threat smaller than 5/16"
Required: 8
bronze, inlet and exhaust valve, tappered nose
Required: 8
diameter: 35,6 mm length: 89,5 mm
970cc 1964-66, 1071 cc 1963-64, 1275 cc 1964-67, cylinder head with casting: AEG163
Indentification: smal collet groove
Required: 4
diameter: 30,97 mm length: 89,6 mm
970cc 1964-66, 1071 cc 1963-64, 1275 cc 1964-67, cylinder head with casting: AEG163
Indentification: smal collet groove
Required: 4
diameter: 35,6 mm length: 90,9 mm
1275 cc 1968-71 Mk3, cylinder head with casting: 12G940
Indentification: small collet groove
Required: 4
diameter: 29,44 mm length: 90,8 mm
1275 cc 1968-71 Mk3, cylinder head with casting: 12G940
Indentification: small collet groove
Required: 4
oil gallery. Diameter: 1/2", total height: 3/8"
Required: 1
for bypass hose
also used by cast iron water pumps
Required: 1
large port specification
if LCB-Manifold fitted or bigger ports
Required: 1
classic copper gasket on metal layer for engines up to 1340 cc
alternatives
Required: 1
classic soft material gasket on metal layer
Required: 1
classic soft material gasket on metal layer with special sealing ring for the oil feed
alternatives
Required: 1
non-setting gasket and jointing compound
Content: 80 ml (€199.88 / 1000 ml)
with classic soft material head gasket on metal layer with special sealing ring for the oil feed
alternatives
Required: 1
with classic copper gasket on metal layer
alternatives
Required: 1
