Zenith Stromberg CD150 internal carburettor MK4 - USA specification from November 1970 to December 1974
fixed type - marked: B5AY
Carburettor reference no.: 3336 and 3427
Required: 1
fixed type for Zenith Stromberg carburettors with reference no. 3506 and 3612 - marked: B5CH
Required: 1
throttle disc retaining on Zenith Stromberg carburettors
Required: 2
throttle spindle
Required: 2
Carburettor reference no.: 3336
Required: 1
throttle stop lever
Carburettor reference no.: 3336
Required: 1
Carburettor reference no.: 3612
Required: 1
throttle stop lever
Carburettor reference no.: 3612
Required: 1
Carburettor reference no.: 3427 and 3506
Required: 1
throttle stop lever
Carburettor reference no.: 3427 and 3506
Required: 1
Carburettor reference no.: 3336, 3427 and 3506
Required: 1
Carburettor reference no.: 3612
Required: 1
throttle stop
Carburettor reference no.: 3336, 3427 und 3506
Required: 1
for throttle stop screw
Carburettor reference no.: 3336, 3427 and 3506
Required: 1
throttle stop
Carburettor reference no.: 3612
Required: 1
for throttle stop screw
Carburettor reference no.: 3612
Required: 1
Carburettor reference no.: 3336
Required: 1
Carburettor reference no.: 3427 and 3506
Required: 1
Carburettor reference no.: 3612
Required: 1
bypass valve to carburettor body - short
Required: 1
Carburettor reference no: 3336
Required: 1
Carburettor reference no.: 3427, 3506 and 3612
Required: 1
on temperature compensator - 16 mm outer diameter
Required: 1
Carburettor reference no.: 3336
Required: 1
Carburettor reference no.: 3427 and 3506
Required: 1
Carburettor reference no.: 3612
Required: 1
automatic choke to carburettor body
Required: 2
Required: 2
automatic choke
Carburettor reference no.: 3336 and 3427
Required: 1
automatic choke
Carburettor reference no.: 3506 and 3612
Required: 1
Required: 1
automatic choke
Carburettor reference no.: 3506
Required: 1
automatic choke
Carburettor reference no.: 3612
Required: 1
Carburettor reference no.: 3612
Required: 1
fast idle
Carburettor reference no.: 3612
Required: 1
on adjusting screw
Carburettor reference no.: 3612
Required: 1
for Zenith Stromberg 150CD carburettors - bore: 1.50 mm
Required: 1
for Zenith Stromberg carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat. This valve is less likely to stick open or over fuel on run over
Required: 1
for Zenith Stromberg carburettor - unsinkable float made of nitrile rubber
Required: 1
Required: 1
float chamber on Zenith Stromberg carburettors - made of plastic with brass cap and 'O' ring
Plastic with brass cap
Required: 1
for one Zenith Stromberg 150CD type carburettor
Required: 1
for one Zenith Stromberg 150CD type carburettor
Required: 1
for one Zenith Stromberg 150CD type carburettor
Required: 1
