Differential - MK4 and 1500
with new crown wheel and pinion. Ratio: 3.89:1 - reconditioned, in exchange
Ratio: 3.89:1 ratio
Required: 1
with 3.63:1 ratio - reconditioned, in exchange
Ratio: 3.63:1 ratio
Required: 1
with new crown wheel and pinion, ratio: 3.63:1 - reconditioned, in exchange
Ratio: 3.63:1 ratio
Required: 1
with new crown wheel and pinion - exchange
Ratio: 3.27:1 ratio
Required: 1
with 4.11:1 ratio. Please note: The assembly is carried out with solid spacer and shims
Mk4 to mid. 1973
Required: 1
with 3.89:1 ratio. Please note: The assembly is carried out with solid spacer and shims
Mk4 to mid. 1973
Required: 1
with 3.89:1 ratio
MK4 from mid. 1973, all 1500 (models with collapsible spacer)
Required: 1
with 3.63:1 ratio
MK4 from mid. 1973, all 1500 (models with collapsible spacer)
Required: 1
with 3.27:1 ratio
MK4 from mid. 1973, all 1500 (models with collapsible spacer)
Required: 1
MK4, 1500 to chassis no. FH106100 and FM67065
Required: 1
1500 from chassis no. FH106101 and FM67066
Required: 1
1500 Swiss models from chassis no. FH126381
Required: 1
crown wheel to differential carrier
1500 Swiss models to chassis no. FH126380
Required: 8
0.0765"
0.0795"
0.0800"
0.0840"
0.0825"
0.0855"
0.0900"
0.0930"
0.0945"
0.0960"
differential carrier
MK4, 1500 to chassis no. FH106100 and FM67065
Required: 2
differential carrier
1500 from chassis no. FH106100 and FM67066
Required: 2
differential - 16 teeth
MK4, 1500 to chassis no. FH106100 and FM67065
Required: 2
differential - 15 teeth
1500 from chassis no. FH106101 and FM67066
Required: 2
planet gears
Required: 1
differential pinion shaft
MK4, 1500 to chassis no. FH106100 and FM67065
Required: 1
differential pinion shaft
1500 from chassis no. FH106101 and FM67066
Required: 1
differential - 10 teeth
MK4, 1500 to chassis no. FH106100 and FM67065
Required: 2
differential - 10 teeth
1500 from chassis no. FH106101 and FM67066
Required: 2
planet gear - 0.027"
MK4, 1500 to chassis no. FH106100 and FM67065.
planet gear - 0.029"
MK4, 1500 to chassis no. FH106100 and FM67065.
planet gear - 0.031"
MK4, 1500 to chassis no. FH106100 and FM67065.
planet gear - 0.033"
MK4, 1500 to chassis no. FH106100 and FM67065.
planet gear - 0.035"
MK4, 1500 to chassis no. FH106100 and FM67065.
planet gear - 0.037"
MK4, 1500 to chassis no. FH106100 and FM67065.
planet gear - 0.039"
MK4, 1500 to chassis no. FH106100 and FM67065.
planet gear - 0.041"
MK4, 1500 to chassis no. FH106100 and FM67065.
planet gear - 0.043"
MK4, 1500 to chassis no. FH106100 and FM67065.
planet gear - 0.027"
1500 from chassis no. FH106101 and FM67066.
planet gear - 0.029"
1500 from chassis no. FH106101 and FM67066.
planet gear - 0.031"
1500 from chassis no. FH106101 and FM67066.
planet gear - 0.033"
1500 from chassis no. FH106101 and FM67066.
planet gear - 0.035"
1500 from chassis no. FH106101 and FM67066.
planet gear - 0.037"
1500 from chassis no. FH106101 and FM67066.
planet gear - 0.039"
1500 from chassis no. FH106101 and FM67066.
planet gear - 0.041"
1500 from chassis no. FH106101 and FM67066
planet gear - 0.043"
1500 from chassis no. FH106101 and FM67066.
planet gear - 0.045"
1500 from chassis no. FH106101 and FM67066.
planet gear - 0.047"
1500 from chassis no. FH106101 and FM67066.
oil drain and oil filler - 5/16" allen drive with 5/8" x 18 SAE thread, tappered, 1/2" total height
Required: 1
Required: 4
solid type
MK4 to mid. 1973 (models with solid spacer and shims)
Required: 1
differential - collapsible spacer between pinion bearings
MK4 from mid. 1973, all 1500 (models with collapsible spacer)
Required: 1
0.003"
MK4 to mid. 1973 (models with solid spacer and shims)
Required: 1
0.005"
MK4 to mid. 1973 (models with solid spacer and shims)
Required: 1
0.010"
MK4 to mid. 1973 (models with solid spacer and shims)
Required: 1
0.030"
MK4 to mid. 1973 (models with solid spacer and shims)
Required: 1
propshaft - round type
MK4 to mid. 1973 (models with solid spacer and shims)
Required: 1
propshaft - round type
MK4 from mid. 1973, all 1500 (models with collapsible spacer)
Required: 1
securing flange on pinion
MK4 to mid. 1973 (models with solid spacer and shims)
Required: 1
securing flange on pinion
MK4 from mid. 1973, all 1500 (models with collapsible spacer)
Required: 1
MK4 to mid. 1973 (models with solid spacer and shims)
Required: 1
over pinion nut
MK4 from mid. 1973, all 1500 (models with collapsible spacer)
Required: 1
differential breather
An 1/8" breather hole must be drilled into the plug
Required: 1
- large
LH side only
Required: 1
