SU-HS6 internal carburettor - TR4A from CTC62191
main jet to choke lever
Part of our sundries kit 21455 (ill. 1)
Required: 2
fast idle
Part of our sundries kit 21455 (ill. 1)
Required: 2
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
Required: 4
rear carburettor - supplied in pairs
Contains throttle spindle and choke lever return springs (ill. 8 and 20)
Required: 1
front carburettor - supplied in pairs
Contains throttle spindle and choke lever return springs (ill. 8 and 20)
Required: 1
throttle shaft - rear carburettor
Part of our sundries kit 2731 (ill. 19)
Required: 1
without valve - diameter 1 3/4"
European specification vehicles - carburettor no. AUD209
Required: 2
USA specification vehicles - carburettor no. AUD284
Required: 2
for 5/16" throttle spindles with standard size. Length: 115 mm
Required: 1
for 5/16" throttle spindles with 0.010" oversize. Length: 235 mm
Required: 1
for SU carburettors, three-piece including jet linkage spanner
Required: 1
rear carburettor
Part of our sundries kit 2731 (ill. 19)
Required: 1
front carburettor
Part of our sundries kit 2731 (ill. 19)
Required: 1
throttle spindle
Part of our sundries kit 2731 (ill. 19)
Required: 2
throttle spindle on front and rear carburettor - stainless steel reproduction
Part of our sundries kit 2731 (ill. 19)
Required: 2
throttle return lever and throttle spindle
Part of our sundries kit 2731 (ill. 19)
Required: 2
throttle spindle
Part of our sundries kit 2731 (ill. 19)
Required: 2
front carburettor
Original type
Required: 1
rear carburettor
Replacement - these levers should be fitted only in pairs
Required: 1
front carburettor
Replacement - these levers should be fitted only in pairs
Required: 1
starter bar guide - complete kit with sleeve and washers
Required: 2
European specification vehicles - carburettor no. AUD209
Required: 2
USA specification vehicles - carburettor no. AUD284
Required: 2
with piston for SU-H6 and HS6 carburettors
European specification vehicles - carburettor no. AUD209
Required: 2
with piston
USA specification vehicles - carburettor no. AUD284
Required: 2
fixed - TW - standard
European specification vehicles - carburettor no. AUD209
Required: 2
fixed - QW - standard
USA specification vehicles - carburettor no. AUD284
Required: 2
with spring - carburettor piston
European specification vehicles - carburettor no. AUD209
Required: 2
with spring - carburettor piston
USA specification vehicles - carburettor no. AUD284
Required: 2
assembly. For SU-HS carburettors with fixed metering needle
Required: 2
rear carburettor
European specification vehicles - carburettor no. AUD209
Required: 1
front carburettor
European specification vehicles - carburettor no. AUD209
Required: 1
rear carburettor - Diameter: 0.090". Identification: green marking sleeve
USA specification vehicles - carburettor no. AUD284
Required: 1
front carburettor
USA specification vehicles - carburettor no. AUD284
Required: 1
main jet
Part of our main jet 17243, 1504, 16347 and 16350 (ill. 43)
Required: 2
main jet
Part of our main jet 17243, 1504, 16347 and 16350 (ill. 43)
Required: 2
main jet
Part of our main jet 17243, 1504, 16347 and 16350 (ill. 43)
Required: 2
main jet feed
Part of our main jet 17243, 1504, 16347 and 16350 (ill. 43)
Required: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat
Required: 2
for SU HS type carburettor - uprated 'unsinkable' type, made from closed cell Nitrile rubber foam, resistant to modern ethanol based fuels
Required: 2
for two SU-HS6 type carburettors. Comprising service kit plus throttle discs and throttle spindles
Required: 1
