Radiator - TR2 to TR4
exchange - characteristic: centered inlet, long filler neck extension and crank hole
TR2 to TS1200
Required: 1
new - characteristic: offset inlet, long filler neck extension and crank hole
TR2 from TS1201, TR3, TR3A, TR3B, TR4 to CT9552 (may replace all earlier versions)
Required: 1
new - characteristic: offset inlet, long filler neck extension and no crank hole
TR2 from TS1201, TR3, TR3A, TR3B, TR4 to CT9552 (may replace all earlier versions)
Required: 1
new - characteristic: offset inlet, no filler neck extension and no crank hole
TR4 from CT9553
Required: 1
radiator - pressure: 4 PSI, 1" depth
TR2, TR3, TR3A and TR3B with long filler neck
Required: 1
radiator - pressure: 7 PSI, 3/4" depth
TR4 to CT9552 with long filler neck
Required: 1
radiator - 7 PSI, 3/4" depth
TR4 from CT9553 no filler neck
Required: 1
original brass type - with 9/16" BSP threadq
Required: 1
radiator
To adjust the radiator height to exactly line up the top oultlet on the thermostat housing
super coolant
Required: 1
Content: 355 ml (€61.97 / 1000 ml)
