Solid axle Lockheed type - TR2, TR3 to TS13045
Required: 1
differential
Required: 1
oil filler on rear axle cover
Required: 1
Required: 1
axle casing
Required: 1
Required: 1
differential
Required: 2
shaft to differential carrier
Required: 1
differential
Required: 2
with 3.70:1 ratio (teeth: 10/37)
Differential carrier holes must be drilled to 25/64" and countersink on both sides
Required: 1
with 4.10:1 ratio
Differential carrier holes must be drilled to 25/64" and countersink on both sides
Required: 1
bearing cap to axle casing
Required: 4
differential - solid spacer between pinion bearings
Required: 1
propshaft - square type
Original type
Required: 1
propshaft - round variant
May replace original flange but need some modification
Required: 1
wheel bearing
Required: 2
Vehicles fitted with disc wheels
Required: 2
LH
Vehicles fitted with wire wheels
Required: 1
RH
Vehicles fitted with wire wheels
Required: 1
brake drum to hub - short
Vehicles fitted with wire wheels
Required: 6
brake drum to hub - long
Vehicles fitted with wire wheels
Required: 2
rear hub - internally splined
Required: 2
€368.33
