Fuses and wiring harness fittings
in metal with insulation to the bracket, for two cables - variant with E10/13 screw base for bulb 2877
in plastic with two cables - variant with W2 1x9.5d capless base for bulb 7478
for crimping or soldering - cable cross section: 0.65 mm², carrying capacity: 5.75 amps
for crimping or soldering - cable cross section: 1.00 mm², carrying capacity: 8.00 amps
for crimping or soldering - cable cross section: 2.00 mm², carrying capacity: 25 amps
for crimping or soldering - cable cross section: 3.00 mm², carrying capacity: 33 amps
for 1/2" lucar connector 356060 (ill. 24)
for 3/8" lucar connector 356062 (ill. 25)
25 Ampere with 32 mm overall length and 6.2 mm diameter. Glass type
35 Ampere with 32 mm overall length and 6.2 mm diameter. Glass type
50 Ampere with 32 mm overall length and 6.2 mm diameter. Glass type
25 Ampere with 32 mm overall length and 6.2 mm diameter. Packet of five glass type fuses
35 Ampere with 32 mm overall length and 6.2 mm diameter. Packet of five glass type fuses
1/4" - cable cross section: 2.00 mm², piggy-back type
3/16" - slotted terminal. To suit up to 2.00 mm² cable diameter
3/16" - slotted terminal. To suit over 2.00 mm² cable diameter
3/16" hole - flag type eyelet terminal. To suit up to 2.00 mm² cable diameter
3/16" hole - eyelet terminal. To suit up to 2.00 mm² cable diameter
1/4" hole - eyelet terminal. To suit up to 2.00 mm² cable diameter
5/16" hole - eyelet terminal. To suit up to 2.00 mm² cable diameter
3/8" hole - eyelet terminal. To suit up to 2.00 mm² cable diameter
3/16" hole - eyelet terminal. To suit over 2.00 mm² cable diameter
1/4" hole - eyelet terminal. To suit over 2.00 mm² cable diameter
5/16" hole - eyelet terminal. To suit over 2.00 mm² cable diameter
3/8" hole - eyelet terminal. To suit over 2.00 mm² cable diameter
p-shaped metal clip with 1/4" clamping range and 7/32" fixing hole diameter
for 1” cable and 7/32” hole
PVC - for 7/16” cable and 9/64” hole