Windscreen wiper, rack and wheel box
stainless steel, straight for driver side
TR5/250 LHD models.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
stainless steel, RH cranked for passenger side
TR5/250 LHD models.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
stainless steel, length: 10" - for flat and curved screens. Feature: centre hinge for wiper arm with 5.2 mm bayonet fitting
TR5/250 LHD models.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 2
stainless steel, straight for driver side
TR5/250 RHD models.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
stainless steel, LH cranked for passenger side
TR5/250 RHD models.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
stainless steel, length: 10" - for flat and curved screens. Feature: centre hinge for wiper arm with 5.2 mm bayonet fitting
TR5 RHD models.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 2
for wheel box with jet assembly. Complete car set
TR5/250
Required: 1
wheel box - chromed six sided nut for Lucas DR3A type wiper motor
TR5/250
Required: 2
wheel box - chromed and polished six sided nut for Lucas DR3A type wiper motor
TR5/250
Required: 2
stainless steel, straight for driver side
TR6 LHD models: Carburettor to CC85737, P.I. to CP77718.
Main identifier: spline fitting to wheel box, 7 mm 'bayonet' fitting for wiper blade
Required: 1
stainless steel, RH cranked for passenger side
TR6 LHD models: Carburettor to CC85737, P.I. to CP77718.
Main identifier: spline fitting to wheel box, 7 mm 'bayonet' fitting for wiper blade
Required: 1
stainless steel, length: 11" - for flat and curved screens. Feature: centre hinge for wiper arm with 7 mm bayonet fitting
TR6 LHD models: Carburettor to CC85737, P.I. to CP77718
Required: 2
stainless steel, straight for driver side
TR6 RHD models: P.I. to CP77718.
Main identifier: spline fitting to wheel box, 7 mm 'bayonet' fitting for wiper blade
Required: 1
stainless steel, LH cranked for passenger side
TR6 RHD models: P.I. to CP77718.
Main identifier: spline fitting to wheel box, 7 mm 'bayonet' fitting for wiper blade
Required: 1
stainless steel, length: 11" - for flat and curved screens. Feature: centre hinge for wiper arm with 7 mm bayonet fitting
TR6 RHD models: P.I. to CP77718.
Main identifier: spline fitting to wheel box, 7 mm 'bayonet' fitting for wiper blade
Required: 2
black, straight for driver side
TR6 LHD models: Carburettor from CF1, P.I. from CR1
Main identifier: spline fitting to wheel box, 7 mm 'bayonet' fitting for wiper blade
Required: 1
black, RH cranked for passenger side
TR6 LHD models: Carburettor from CF1, P.I. from CR1
Main identifier: spline fitting to wheel box, 7 mm 'bayonet' fitting for wiper blade
Required: 1
black - length: 11"
TR6 LHD models: Carburettor from CF1, P.I. from CR1
Main identifier: spline fitting to wheel box, 7 mm 'bayonet' fitting for wiper blade
Required: 2
black, straight for driver side
TR6 RHD models: P.I. from CR1.
Main identifier: spline fitting to wheel box, 7 mm 'bayonet' fitting for wiper blade
Required: 1
black, LH cranked for passenger side
TR6 RHD models: P.I. from CR1.
Main identifier: spline fitting to wheel box, 7 mm 'bayonet' fitting for wiper blade
Required: 1
black - length: 11"
TR6 RHD models: P.I. from CR1.
Main identifier: spline fitting to wheel box, 7 mm 'bayonet' fitting for wiper blade
Required: 2
for wheel box with jet assembly. Complete car set
TR6
Required: 1
