Gearbox, overdrive specification - inner
for ball bearings
Lithium based multipurpose grease
Required: 1
Content: 100 g (€29.50 / 1000 g)
1st speed gear
To chassis no. CF12500 and CR5000
Required: 1
1st speed gear
From chassis no. CF12501 and CR5001
Required: 1
1st speed - new item
To gearbox no. CD20281
Required: 1
1st speed
From gearbox no. CD21769
Required: 1
1st and 2nd speed
To gearbox no. CD20281
Required: 1
1st and 2nd speed
From gearbox no. CD20282
Required: 1
sleeve - 1st and 2nd speed
Required: 1
1st speed gear - 0.118"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.121"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.124"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.126"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.127"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.13"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.132"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.138"
To chassis no. CF12500 and CR5000.
0.200 to 0.202"
From chassis no. CF12501 and CR5001
2nd speed
From gearbox no. CD20282 to CD21768
Required: 1
2nd speed
From gearbox no. CD21769 to chassis no. CF12500 and CR5000
Required: 1
2nd speed gear - original equipment
To chassis no. CF12500 and CR5000
Required: 1
2nd speed gear - uprated version
To chassis no. CF12500 and CR5000
Required: 1
2nd speed gear
From chassis no. CF12501 and CR5001
Required: 1
3rd speed gear
To chassis no. CF12500 and CR5000
Required: 1
3rd speed gear
From chassis no. CF12501 and CR5001
Required: 1
3rd and 4th speed
To gearbox no. CD20281
Required: 1
3rd and 4th speed
From gearbox no. CD20282
Required: 1
inner section - 3rd and 4th gear
From gearbox no. CD20282
Required: 1
Required: 1
Early cars with 'A' type overdrive to gearbox no. CD20281
Required: 1
Late cars with 'A' type overdrive from gearbox no. CD20282
Required: 1
All cars with 'J' type overdrive from chassis no. CF1 and CR567
Required: 1
mainshaft - shelled type
To gearbox no. CD20281
Required: 1
mainshaft - open cage type
From gearbox no. CD20282
Required: 1
contains first motion shaft and constant gear
To gearbox no. CD20281
Required: 1
From gearbox no. CD20282 to CD21768
Required: 1
closed cage type with 27.01 to 27.02 mm outer diameter. Please note: this bearing must be heat shrining to the 1st motion shaft
Required: 2
shell type - original equipment
May replace open cage needle bearing with spacer and circlip (ill. 41 to 43)
Required: 2
shelled type - reproduction
May replace open cage needle bearing with spacer and circlip (ill. 41 to 43)
Required: 2
with 16 teeth - complete unit including 1st gear and reverse gear
To chassis no. CF12500 and CR5000
Required: 1
with 1st and reverse gear. Feature: 17 teeth
From chassis no. CF12501 and CR5001
Required: 1
constant mesh 4th speed
To gearbox no. CD20281.
This part is only available in kit 1816 (ill. 33)
Required: 1
constant mesh 4th speed
From gearbox no. CD20282 to CD21768
Required: 1
Content: 100 g (€29.50 / 1000 g)
