Differential IRS (independent rear suspension)
ratio: 3.45:1 - reconditioned, in exchange
Ratio: 3.45:1
Required: 1
with new crown wheel and pinion, ratio: 3.45:1 - reconditioned, in exchange
Ratio: 3.45:1
Required: 1
ratio: 3.7:1 - reconditioned, in exchange
Ratio: 3.7:1
Required: 1
with new crown wheel and pinion , ratio: 3.7:1 - reconditioned, in exchange
Ratio: 3.7:1
Required: 1
differential
TR250 to differential no. CTC6241
Required: 1
differential - new item
TR250 to differential no. CTC6241
Required: 1
differential - used item
TR250 to differential no. CTC6241
Required: 3
oil drain and oil filler - non magnetic plug with tapered 3/8" NPT thread with 18 TPI and square head
Required: 1
differential breather
An 1/8" breather hole must be drilled into the plug
Required: 1
differential, rear mounting - new item
TR250 to differential no. CTC6241
Required: 1
differential, rear mounting - used item
TR250 to differential no. CTC6241
Required: 1
bracket to differential cover
TR250 to differential no. CTC6241
Required: 4
rear differential mount
TR250 to differential no. CTC6241
Required: 4
rear differential mount
TR250 to differential no. CTC6241
Required: 4
front upper differential mount
Alternatives
Required: 2
front lower differential mount
Alternatives
Required: 2
differential mounting - rubber
TR250 to differential no. CCT6241.
Alternatives
Required: 1
differential - eight piece set with 4 polyurethane bushes and 4 mountings
TR250 to differential no. CCT6241 (1967)
Required: 1
differential - six piece set with 4 polyurethane bushes and 2 mountings
TR250 from differential no. CCT6242 plus all TR5 and TR6 (1967-76)
Required: 1
differential - six piece set with 4 rubber bushes and 2 mountings
TR250 from differential no. CCT6242 plus all TR5 and TR6 (1967-76)
Required: 1
Required: 1
differential - 10 teeth
Required: 2
differential pinion shaft
Required: 1
differential - 16 teeth
Required: 2
with 3.45:1 ratio (teeth: 11/38)
Alternatives
Required: 1
with 3.70:1 ratio (teeth: 10/37)
Alternatives
Required: 1
with 4.875:1 ratio
Alternatives
Required: 1
bearing cap to differential casing
Required: 4
differential - solid spacer between pinion bearings
TR5/250, TR6 P.I. to CP52867, TR6 Carburettor to CC61570
Required: 1
differential - collapsible spacer between pinion bearings
TR6 P.I. from CP52868, TR6 Carburettor from CC61571
Required: 1
propshaft - original type
Required: 1
propshaft - round variant
May replace original flange but need some modification
Required: 1
LH. Complete unit with flange, bearing housing and bearing
Required: 1
RH. Complete unit with flange, bearing housing and bearing
Required: 1
securing half shaft flange
Required: 2
half shaft
Required: 2
differential - used item
TR250 from differential no. CTC6242 and all TR5 and TR6. May replace the early TR250 version
Required: 1
differential - made from aluminium
TR250 from differential no. CTC6242 and all TR5 and TR6. May replace the early TR250 version
Required: 1
differential - made from magnesium
TR250 from differential no. CTC6242 and all TR5 and TR6. May replace the early TR250 version
Required: 1
differential rear
TR250 from differential no. CTC6242 and all TR5 and TR6. May replace the early TR250 version
Required: 2
differential mounting to cover
TR250 from differential no. CTC6242 and all TR5 and TR6. May replace the early TR250 version
Required: 4
TR250 from differential no. CTC6242 and all TR5 and TR6. May replace the early TR250 version
Required: 4
TR250 from differential no. CTC6242 and all TR5 and TR6. May replace the early TR250 version
Required: 4
€1,690.00
€1,889.99
