Culasse
on rocker cover with golden 'Jaguar' domed acrylic letters on black surface. Dimensions: 95 x 38 mm
Requis: 2
RH
Requis: 1
camshaft block - length: 2"
To engine no. 7P47586
Requis: 4
camshaft block - length: 3.7/8"
To engine no. 7P47586
Requis: 4
camshaft block - length: 1.1/2"
to engine no. 7P47586
Requis: 12
camshaft block to cylinder head
To engine no. 7P47586
Requis: 12
retaining camshaft bearing caps
To engine no. 7P47586
Requis: 28
gauche (B-bank)
Requis: 1
camshaft block - length: 2"
From engine no. 7P47587
Requis: 4
camshaft block - length: 3.3/4"
From engine no. 7P47587
Requis: 4
camshaft block - length: 37 mms
From engine no. 7P47587
Requis: 12
camshaft block to cylinder head
From engine no. 7P47587
Requis: 12
retaining camshaft bearing caps
From engine no. 7P47587
Requis: 28
LH
From engine no. 7P47587
Requis: 1
couvercle arrière du vilebrequin au bloc moteur - diamètre: 5/16"
Requis: 4
réplique avec un diamètre original de 34,9 mm et une hauteur de 22,2 mm
Requis: 24
pour soupapes pour les moteurs Jaguar XK6 et 6,0 V12 (diamètre 17,44 mm <> 0,6126 pouce)
Requis: 1
en haut, pour soupape d'admission et soupape d'échappement - reconstruction
Requis: 24
- repro
To engine no. 7P45000 - not HE engines.
Alternatives
Requis: 12
From engine no. 7P45001 - HE engines only.
Alternatives
Requis: 12
- repro
From engine no. 7P45001 - HE engines only.
Alternatives
Requis: 12
RH - exchange
To engine no. 7P45000 - not HE engines.
Full recondition fitting of all new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Requis: 1
LH - exchange
To engine no. 7P45000 - not HE engines.
Full recondition fitting of all new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Requis: 1
RH - exchange
From engine no. 7P45001 to 7P47586 - HE engines only.
Full recondition fitting of all new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Requis: 1
LH - exchange
From engine no. 7P45001 to 7P47586 - HE engines only.
Full recondition fitting of all new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Requis: 1
RH - exchange
From engine no. 7P47587 - HE engines only.
Full recondition fitting of all new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Requis: 1
LH - exchange
From engine no. 7P47587 - HE engines only.
Full recondition fitting of all new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Requis: 1
inlet valve +0.003" (1st oversize). Steel type
Requis: 12
inlet valve +0.005" (2nd oversize). Steel type
Requis: 12
exhaust valve +0.003" (1st oversize). Steel type
To engine no. 7P45000 - not HE engines
Requis: 12
exhaust valve +0.005" (2nd oversize). Steel type
To engine no. 7P45000 - not HE engines
Requis: 12
exhaust valve +0.003" (1st oversize). Steel type
From engine no. 7P45001 - HE engines only
Requis: 12
exhaust valve +0.005" (2nd oversize). Steel type
From engine no. 7P45001 - HE engines only
Requis: 12
cylinder head - uprated flange nut with 3/8" UNF thread and 9/16" AF spanner size
Requis: 24
série I, série II jusqu'au numéro de moteur 7P25000 (1972-75)
Requis: 1
série II du numéro de moteur 7P25001 et série III jusqu'au numéro de moteur 7P42299 (1975-81)
Requis: 1
séries I et II, série III jusqu'au numéro de moteur 7P42299 (1972-81)
Requis: 1
série III à partir du numéro de moteur 7P42300 (1981-92)
Requis: 1
série III à partir du numéro de moteur 7P42300 (1981-92)
Requis: 1
oil feed pipe to head
Repair bolt - 1.1/4" long
Requis: 2
sides of cylinder head
To engine no. 7P45000
Requis: 14
sides of cylinder head
From engine no. 7P45001
Requis: 14
RH
To engine no. 7P45000 - not HE engines
Requis: 1
LH
To engine no. 7P45000 - not HE engines
Requis: 1
inlet, hardened, semi finished. For lead free applications
To engine no. 7P45000 - not HE engines.
For lead free applications
Requis: 12
exhaust, hardened, semi finished. For lead free applications
To engine no. 7P45000 - not HE engines.
For lead free applications
Requis: 12
inlet, hardened
From engine no. 7P45001 - HE engines only.
For lead free applications
Requis: 12
exhaust, hardened
From engine no. 7P45001 - HE engines only.
For lead free applications
Requis: 12
chromé. Fixation cache de soupapes et des culasses
Requis: 1
chromé. Fixation cache de soupapes et des culasses
Requis: 1
XJ12 série I (1972-73), XJ12 série II jusqu'au numéro de moteur 7P25000 (modèles avec carburateur)
Requis: 1
avec joints de tête en matériaux Cometic CFM avec alésage de 93 mm et épaisseur de montage de 1,5 mm
XJ12 série I (1972-73), XJ12 série II jusqu'au numéro de moteur 7P25000 (modèles avec carburateur)
Requis: 1
Series II fuel injection cars, Series III to engine no. 7P45000 - not HE engines
Requis: 1
série III à partir numéro de moteur 7P45001
Requis: 1
réplique
série III à partir numéro de moteur 7P45001
Requis: 1
