Cylinder block and oil filter 2.25 petrol engine
main bearing cap
Vehicles with 3 main bearings
Requis: 6
main bearing cap
Vehicles with 5 main bearings
Requis: 10
main bearing cap
Vehicles with 3 main bearings
Requis: 6
main bearing cap
Vehicles with 5 main bearings
Requis: 10
retaining timing cover
Series II models
Requis: 1
Series IIA models
Requis: 1
retaining flywheel housing to cylinder block
Vehicles with 3 main bearings
Requis: 2
retaining flywheel housing to cylinder block
Vehicles with 5 main bearings
Requis: 2
- RH
To engine no.151023739
Requis: 1
- RH
From engine no.151023740
Requis: 1
- LH
To engine no.151023739
Requis: 1
- LH
From engine no.151023740
Requis: 1
- LH
Series III
Requis: 1
retaining engine bracket to cylinder block - long, imperial
Requis: 1
flywheel housing
Vehicles with 3 main bearings
Requis: 1
clutch housing
Vehicles with 5 main bearings
Requis: 1
drain plug
Requis: 1
3/8" - diamètre extérieur : 13/16" - épaisseur : 2 mm
Requis: 6
retaining inspection cover plate
Series II and IIA
Requis: 2
inspection aperture
Series II and IIA
Requis: 1
inspection aperture
Series II and IIA
Requis: 1
- rear position
Series II, IIA and Serie III with engine prefix 901 and 904 and engine prefix 361 and 364 suffix A and B only
Requis: 1
with filler neck - rear position
Series III from engine prefix 901 and 904, suffix C and D inclusive
Requis: 1
with filler neck - rear position
Series III from engine prefix 901 and 904 suffix E and all prefix 361 and 364
Requis: 1
sans aération, diamètre: 58 mm
Requis: 1
- imperial
Requis: 2
en papier. Dimensions : diamètre extérieur : 92 mm, hauteur :174 mm, diamétre trou : 19 mm
Requis: 1
en papier. Dimensions : diamètre extérieur : 92 mm, hauteur :118 mm, diamétre trou : 32 mm
Requis: 1
contacteur pression d'huile
Requis: 1
Series II
Requis: 1
contacteur pression d'huile
Requis: 4
