Axle casing and differential - Rover axle
Serie II, IIA
Requis: 1
1.1/16" - diam.ext. 1.3/8", épaisseur: 1/8"
Requis: 1
differential - 3/4"-14 BSPT thread with 5/8 "AF square socket
Requis: 1
differential to axle casing - short, BSF
Serie II, IIA
Requis: 4
differential to axle casing - short, UNF
Serie II, IIA
Requis: 4
differential to axle casing - feature: 3/8"-24 UNF thread
Serie II, IIA
Requis: 6
differential to axle casing - long, UNF
Serie II, IIA
Requis: 6
differential to axle casing - feature: 3/8"-24 UNF thread
Serie III
Requis: 6
démultiplication 4,7:1 ( 10/47 dents)
Requis: 1
differential pinion
Vehicles to axle suffix "A"
Requis: 1
for pinion
Vehicles from axle suffix "B"
Requis: 1
retaining bearing cap - BSF
Serie II, IIA and Serie III to suffix "G", 109 V8 to suffix "C"
Requis: 4
retaining bearing cap - metric
Serie III from suffix "H", 109 V8 from suffix "D"
Requis: 4
for bearing adjustment
Serie II, IIA and Serie III to suffix "G", 109 V8 to suffix "C"
Requis: 2
for bearing adjustment
Serie III from suffix "H", 109 V8 from suffix "D"
Requis: 2
Serie II, IIA und Serie III bis Kennbuchstabe "G", 109er V8 bis Kennbuchstabe "C"
Requis: 2
Serie III from suffix "H", 109 V8 from suffix "D"
Requis: 2
Requis: 2
outer pinion bearing
Vehicles to axle suffix "A"
Requis: 1
outer differential pinion bearing
Vehicles from axle suffix "B"
Requis: 1
pinion, rear position - 0.020"
Serie II, IIA
roue conique, palier arrière - épaisseur : 0,060"
roue conique, palier arrière - épaisseur : 0,066"
pinion, rear position - 0.072"
Serie II, IIA and III
pinion, rear position - 0.074"
Serie II, IIA and III
pinion, rear position - 0.076"
Serie II, IIA and III
pinion, rear position - 0.081"
Serie II, IIA and III
differential pinion
Serie II, IIA
Requis: 1
differential input shaft - feature: 4 internal splines
Requis: 1
differential - 3/4"-14 BSPT thread with 5/8 "AF square socket
Serie III
Requis: 1
axle casing
Serie III from vehicle no. 14270 onwards
Requis: 1
