Démarreur
M418G "bomb type" - revisionné, en échange. Caractéristique: volant-moteur avec coronne dentée à 91 dents
TR2 et TR3, TR3A à TS50000 (1953-59)
Requis: 1
pour les démarreurs Lucas M45G et M418G. Ensemble de 2 pièces
Requis: 2
commutator end bracket
TR2, TR3, TR3A to TS50000
Requis: 1
armature shaft
TR2, TR3, TR3A to TS50000
Requis: 1
drive end bracket
TR2, TR3, TR3A to TS50000
Requis: 1
drive end bracket, oversize type for worn cast shafts
TR2, TR3, TR3A to TS50000
Requis: 1
through brackets
TR2, TR3, TR3A to TS50000
Requis: 2
for starter pinion
TR2, TR3, TR3A to TS50000
Requis: 1
for starter pinion
TR2, TR3, TR3A to TS50000
Requis: 1
with 9 teeth
TR2, TR3, TR3A to TS50000
Requis: 1
starter motor
TR2, TR3, TR3A to TS50000
Requis: 1
M418G "long type" - revisionné, en échange. Caractéristique: Avec couronne dentée à 90 dents vissée sur le volant-moteur
Requis: 1
TR3A from TS50001, TR3B, TR4 and TR4A
Requis: 1
for genuine M418G type starter motor
TR3A from TS50001, TR3B, TR4 and TR4A
Requis: 1
pour les démarreurs Lucas M45G et M418G. Ensemble de 2 pièces
Requis: 2
for replacement 2M100 type starter motor
TR3A from TS50001, TR3B, TR4 and TR4A
Requis: 2
brush tension
TR3A from TS50001, TR3B, TR4 and TR4A
Requis: 1
commutator end
TR3A from TS50001, TR3B, TR4 and TR4A
Requis: 1
commutator end bracket
TR3A from TS50001, TR3B, TR4 and TR4A
Requis: 1
armature shaft
TR3A from TS50001, TR3B, TR4 and TR4A
Requis: 1
drive end
TR3A from TS50001, TR3B, TR4 and TR4A
Requis: 1
drive end bracket
TR3A from TS50001, TR3B, TR4 and TR4A
Requis: 1
drive end bracket, oversize type for worn cast shafts
TR3A from TS50001, TR3B, TR4 and TR4A
Requis: 1
through brackets
TR3A from TS50001, TR3B, TR4 and TR4A
Requis: 2
securing band cover
TR3A from TS50001, TR3B, TR4 and TR4A
Requis: 1
with 10 teeth
TR3A from TS50001, TR3B, TR4 and TR4A
Requis: 1
for starter pinion - supplied without thrust washers
TR3A from TS50001, TR3B, TR4 and TR4A
Requis: 1
starter motor
TR3A from TS50001, TR3B, TR4 and TR4A
Requis: 1
on nut
TR3A from TS50001, TR3B, TR4 und TR4A - 2M100 starter motor armature shaft with thread
Requis: 1
with cup washer
TR3A from TS50001, TR3B, TR4 and TR4A -M418G starter motor armature shaft without thread
Requis: 1
starter motor to gearbox
TR2, TR3, TR3A, TR3B and early TR4.
Identify by 11 mm gearbox mounting flange
Requis: 2
starter motor to gearbox
late TR4, TR4A.
Identify by 14 mm gearbox mounting flange
Requis: 2
puissance: 1,0 kW
TR2-3A, TR3A jusqu'à TS50000
Requis: 1
puissance: 1,0 kW
TR3A à partir TS50001, TR4A
Requis: 1
