Pédale d'accélérateur, timonerie d'accélérateur et câble d'accélérateur - TR5, TR6 P.I. jusqu'à septembre 1972
Requis: 1
cable operated fast idle
Requis: 1
choke cable
TR6 from engine no. CP50001
Requis: 1
with 7/16" inner diameter
Fast idle cam to bracket
Requis: 1
Fast idle cam to bracket
Requis: 1
return spring to inner wing
Requis: 1
accelerator cable through hole in dash shelf
Requis: 1
accelerator cable an RH inner wing
Requis: 1
TR5, TR6 to engine no. CP26998
Requis: 1
TR6 from engine no. CP50001
Requis: 1
Accelerator cable to throttle lever
Requis: 1
for throttle stop adjusting screw
Requis: 1
securing throttle linkage to inlet manifold
Requis: 2
Throttle linkage and choke cable bracket to inlet manifold
Requis: 6
Throttle linkage and choke cable bracket to inlet manifold
Requis: 6
throttle linkage to inlet manifold
TR5, TR6 to engine no. CP26804
Requis: 3
control rod, upper
TR5, TR6 to engine no. CP26804
Requis: 3
control rod, lower
TR5, TR6 to engine no. CP26804
Requis: 3
with joints - throttle linkage to inlet manifold
TR6 from engine no. CP26805.
May replace all earlier versions
Requis: 3
control rod, upper
TR6 from engine no. CP26805.
May replace all earlier versions
Requis: 3
control rod, lower
TR6 from engine no. CP26805.
May replace all earlier versions
Requis: 3
TR6 from engine no. CP26805.
May replace all earlier versions
Requis: 9
TR6 from engine no. CP26805.
May replace all earlier versions
Requis: 6
TR6 from engine no. CP26805.
May replace all earlier versions
Requis: 6
upper joint
TR6 from engine no. CP26805.
May replace all earlier versions
Requis: 3
LHD
Requis: 1
accelerator cable to battery retaining bar
LHD
Requis: 1
pedal shaft
LHD
Requis: 1
accelerator pedal shaft
RHD
Requis: 1
