Coppa dell‘olio BN4, BN6, BN7, BT7, BJ7 e BJ8
steel - reconditioned, in exchange
Alternatives
Richiesto: 1
oil drain - 14 TPI x 3/4" UNS
Cars with steel oil sump
Richiesto: 1
oil sump attachment - length: 1/2"
BN7, BT7, BJ7 and BJ8
Richiesto: 23
oil sump attachment - length: 1"
BN7, BT7, BJ7 and BJ8
Richiesto: 2
oil pressure operating valve - used item
Richiesto: 1
new item
Richiesto: 1
gear type
BN7 and BT7 from engine no. 29D-H895, all BJ7 and BJ8 - can also be fitted to earlier models
Richiesto: 1
BN7 and BT7 from 29D-H895, all BJ7 and BJ8.
May replaced by oil pump 1740 (ill. 32)
Richiesto: 1
oil pump driven gear
BN7 and BT7 from engine no. 29D-H895 plus alle BJ7 and BJ8 (1959-68)
Richiesto: 1
oil pump driving gear
BN7 and BT7 from 29D-H895, all BJ7 and BJ8.
May replaced by oil pump 1740 (ill. 32)
Richiesto: 1
oil pump
BN7 and BT7 from 29D-H895, all BJ7 and BJ8.
May replaced by oil pump 1740 (ill. 32)
Richiesto: 1
oil pump
BN7 and BT7 from 29D-H895, all BJ7 and BJ8.
May replaced by oil pump 1740 (ill. 32)
Richiesto: 1
BN7 and BT7 from 29D-H895, all BJ7 and BJ8.
May replaced by oil pump 1740 (ill. 32)
Richiesto: 1
BN7 and BT7 from 29D-H895, all BJ7 and BJ8.
May replaced by oil pump 1740 (ill. 32)
Richiesto: 4
BN7 and BT7 from 29D-H895, all BJ7 and BJ8.
May replaced by oil pump 1740 (ill. 32)
Richiesto: 4
BN7 and BT7 from 29D-H895, all BJ7 and BJ8.
May replaced by oil pump 1740 (ill. 32)
Richiesto: 4
oil pump
BN4 to engine no. 38262 (1956-57)
Richiesto: 1
oil pump
BN4 from engine no. 38263 plus all BN6, BN7, BT7, BJ7 and BJ8 (1957-68)
Richiesto: 1
high output rotary type, hand built in house
all BN4 and BN6, BN7 and BT7 to engine no. 29D-H894 - can also be fitted to later models
Richiesto: 1
oil pump
BN4, BN6, BN7 and BT7 to 29D-H894.
May be replaced by oil pump 317525 (ill. 16)
Richiesto: 1
BN4, BN6, BN7 and BT7 to 29D-H894.
May be replaced by oil pump 317525 (ill. 16)
Richiesto: 4
BN4, BN6, BN7 and BT7 to 29D-H894.
May be replaced by oil pump 317525 (ill. 16)
Richiesto: 4
Richiesto: 1
without oil seal
Richiesto: 1
non-setting gasket and jointing compound
Richiesto: 1
Contenuto: 80 ml (199,88 €* / 1000 ml)
Curil K2 - non hardening
Permanently plastic, particulary adhesive, for highliy stressed sealing joints. Recommended for the fitting of oil seals
Richiesto: 1
Contenuto: 60 ml (198,33 €* / 1000 ml)
