Hub, shock absorber and wishbone
inner trailing arm - this kit services one side of the vehicle
3.8 Series 1 from chassis no. OTS 850679 (RHD) and from 879132 (LHD) also FHC from 861106 (RHD) and from 888327 (LHD) (1962-70)
Richiesto: 2
outer trailing arm - this kit services one side of the vehicle
all models
Richiesto: 2
3.8 Series 1 from chassis no. OTS 850679 (RHD) and from 879132 (LHD) also FHC from 861106 (RHD) and from 888327 (LHD) (1962-70)
Richiesto: 2
inner fulcrum shaft bearing
3.8 Series 1 to chassis no. OTS 850678 (RHD) and to 879131 (LHD) also FHC to 861105 (RHD) and to 888326 (LHD) (1961-62)
2 per side
Richiesto: 2
inner fulcrum shaft bearing
3.8 Series 1 from chassis no. OTS 850679 (RHD) and from 879132 (LHD) also FHC from 861106 (RHD) and from 888327 (LHD) (1962-70)
2 per side
Richiesto: 2
for the sealing ring of the inner trailing arm bearing
Richiesto: 8
inner fulcrum shaft bearing
3.8 Series 1 to chassis no. OTS 850678 (RHD) and to 879131 (LHD) also FHC to 861105 (RHD) and to 888326 (LHD) (1961-62)
Richiesto: 2
inner fulcrum shaft bearing
3.8 Series 1 from chassis no. OTS 850679 (RHD) and from 879132 (LHD) also FHC from 861106 (RHD) and from 888327 (LHD) (1962-70)
2 per side
Richiesto: 2
0.003" between original type sleeves only
not required with sleeve 204064
0.007"
not required with sleeve 204064
use as required
fulcrum shaft
3.8 Series 1 to chassis no. OTS 850503 (RHD) and to 877182 (LHD) also FHC to 860450 (RHD) and to 885984 (LHD) (1961-62)
Richiesto: 4
for outer trailing arm bearing
3.8 Series 1 from chassis number OTS 850504 (RHD) and from 877183 (LHD) also FHC from 860451 (RHD) and from 885985 (LHD) (1962-70) - early E38 in combination with 204084, 204085 and 204086
Richiesto: 4
3.8 Series 1 from chassis no. OTS 850001 to 850943 (RHD) and from 875001 to 881887 (LHD), FHC from 860001 to 861799 (RHD) and from 885001 to 890873 (LHD) (1961-64)
Richiesto: 2
All 4.2 liter models. From engine number 7E1001 and 7R1001 (1964-1970)
Richiesto: 2
rear wheel bearing - outer position. Original leather version
3.8. and 4.2. Series 1 to chassis number OTS 1E1236 (RHD) and to 1E10978 (LHD), FHC to 1E20638 (RHD) and 1E31002 (LHD) (1961-65)
Richiesto: 2
rear wheel bearing - outer position. Rubber reproduction
3.8. and 4.2. Series 1 to chassis number OTS 1E1236 (RHD) and to 1E10978 (LHD), FHC to 1E20638 (RHD) and 1E31002 (LHD) (1961-65)
Richiesto: 2
outer
4.2 Series 1 from 1965: OTS from 1E1237 (RHD) and 1E10979 (LHD), FHC from 1E20639 (RHD) and 1E31003 (LHD ) plus all E-Type 4.2 Series 2 (1968-70)
Richiesto: 2
outer oil seal - rear suspension
3.8. and 4.2. Series 1 to chassis number OTS 1E1236 (RHD) and to 1E10978 (LHD), FHC to 1E20638 (RHD) and 1E31002 (LHD) (1961-65)
Richiesto: 2
for outer oil seal at rear suspension
4.2 Series 1 from 1965: OTS from 1E1237 (RHD) and 1E10979 (LHD), FHC from 1E20639 (RHD) and 1E31003 (LHD ) plus all E-Type 4.2 Series 2 (1968-70)
Richiesto: 2
drive shaft - greaseable heavy duty type with 106.3 mm span width and 30.2 mm cup diameter
Richiesto: 4
drive shaft - greaseable type with 106.3 mm span width and 30.2 mm cup diameter
Richiesto: 4
plastic, hole: 1", outer diameter: 1.3/8"
Richiesto: 1
rear suspension - high quality reproduction including rubber bushes
Richiesto: 2
assale posteriore - replica con boccole in poliuretano in versione "comfort" morbido
Richiesto: 2
assale posteriore - replica con boccole in poliuretano in design "Race" duro
Richiesto: 2
rear suspension - high quality reproduction with OE Metalastic rubber bushes
Richiesto: 2
rear - high quality reproduction, supplied without bushes
Richiesto: 2
rear radius arm, front - uprated 'comfort' type
Richiesto: 2
rear radius arm, front. Uprated 'race' type
Richiesto: 2
rear radius arm, rear. Uprated 'comfort' type
Richiesto: 2
rear radius arm, rear. Uprated 'race' type
Richiesto: 2
radius arm
Series 1 and 2: OTS and FHC models (1961-70)
Richiesto: 1
radius arm
4.2 Series 1 and 2: 2+2 models (1966-70)
Richiesto: 1
with hole for lock wire - radius arm bracket to chassis. Please note: must be used with thread lock at the point of assemble
Richiesto: 1
radius arm to body
Richiesto: 1
rear suspension craddle - high quality aftermarket product
Richiesto: 4
rear suspension craddle - high quality aftermarket product
Richiesto: 4
differential and rear suspension. Brand new remanufactured item, sandblast and black powder coated
Series 1 and 1.5 (1961-68) - characteristic: all vehicles with Dunlop brakes
Richiesto: 1
differential and rear suspension. used item, sandblast and black powder coated
Series 2 (1968-70) - characteristic: all vehicles with Girling brakes
as required
Richiesto: 1
3.8 Series 1 up to chassis number OTS 850678 (RHD) and up to 879131 (LHD) and FHC up to 861105 (RHD) and up to 888326 (LHD) (1962-70)
Richiesto: 1
3.8 Series 1 from chassis number OTS 850678 (RHD) and from 879131 (LHD) also FHC from 861105 (RHD) and from 888326 (LHD) (1962-70)
Richiesto: 1
rear - spring rate: 233 lb/ins, free length: 10.7/8" (standard height), inner diameter: 2.1/2"
Richiesto: 4
rear - spring rate: 233 lb/ins, free length: 9" (lowered height), inner diameter: 2.1/2"
Richiesto: 4
rear coil spring - bottom. Dimensions: 56 mm ID and 80 mm OD
Richiesto: 1
shock absorber
most replacement shock absorbers are now supplied with the cover
Richiesto: 1
at top of coil spring
use with standard shock absorbers
Richiesto: 4
at top of coil spring
use with Koni shock absorbers
Richiesto: 1
at top of Spax shock absorber
use with standard shock absorbers
Richiesto: 1
front anti roll bar with 5/8" diameter
Richiesto: 2
rear axle
Series 1 and 2 all OTS and FHC (1961-70)
Richiesto: 1
rear axle
Series 1 and 2 all 2+2 (1966-70)
Richiesto: 1
uprated version for front and rear. Complete with all necessary fittings. This is a direct replacement for the original bars
Series 1 and 2 (1961-70)
Richiesto: 1
RH trailing arm to crossmember
3.8 Series 1 (1961-62): OTS to chassis no. 850678 (RHD) and 879131 (LHD), FHC to chassis no. 861105 (RHD) and 888326 (LHD)
Richiesto: 1
LH trailing arm to crossmember
3.8 Series 1 (1961-62): OTS to chassis no. 850678 (RHD) and 879131 (LHD), FHC to chassis no. 861105 (RHD) and 888326 (LHD)
Richiesto: 1
trailing arm to crossmember
3.8 Series 1 (1962-64): OTS from chassis no. 850679 (RHD) and 879132 (LHD), FHC from chassis no. 861106 (RHD) and 888327 (LHD) plus all 4.2 Series 1 and 2 (1964-70)
Richiesto: 2
RH rear - used item
3.8 Series 1 (1961-62): OTS to chassis no. 850678 (RHD) and 879131 (LHD), FHC to chassis no. 861105 (RHD) and 888326 (LHD)
Richiesto: 1
LH rear - used item
3.8 Series 1 (1961-62): OTS to chassis no. 850678 (RHD) and 879131 (LHD), FHC to chassis no. 861105 (RHD) and 888326 (LHD)
Richiesto: 1
rear suspension - set of two
3.8 Series 1 (1962-64): OTS from chassis no. 850679 and 879132, FHC from chassis no. 861106 and 888327 plus all 4.2 Series 1 and 2 models (1964-70)
Richiesto: 1
RH rear - used item
3.8 Series 1 (1962-64): OTS from chassis no. 850679 and 879132, FHC from chassis no. 861106 and 888327 plus all 4.2 Series 1 and 2 models (1964-70)
Richiesto: 1
LH rear - used item
3.8 Series 1 (1962-64): OTS from chassis no. 850679 and 879132, FHC from chassis no. 861106 and 888327 plus all 4.2 Series 1 and 2 models (1964-70)
Richiesto: 1
rear
3.8 Series 1 (1961-62): OTS to chassis no. 850678 (RHD) and 879131 (LHD), FHC to chassis no. 861105 (RHD) and 888326 (LHD)
Richiesto: 2
rear
3.8 Series 1 from chassis number OTS 850584 (RHD) and from 877964 (LHD) and FHC from 860833 (RHD) and from 886686 (LHD) to 4.2 Series 1 OTS 1E1236 (RHD) and to 1E10978 (LHD) and FHC to 1E20638 (RHD) and to 1E31002 (LHD) (1962-65)
Richiesto: 2
rear
4.2 Series 1 from OTS 1E1237 (RHD) and 1E10979 (LHD) and FHC from 1E20639 (RHD) and 1E31003 (LHD) until the introduction of Series 2 (1965-68)
Richiesto: 2
rear
4.2 Series 2 (1968-70): OTS from 1R1001 (RHD) and 1R7001 (LHD), FHC from 1R20001 (RHD) and 1R25001 (LHD), 2+2 from 1R35001 (RHD) and 1R40001 (LHD)
Richiesto: 2
with 51 mm diameter and 300 mm length
Richiesto: 2
yoke
Richiesto: 2
drive shaft, splined
Richiesto: 2
RH rear - identify by 52 mm spline
Richiesto: 2
LH rear - identify by 52 mm spline
Richiesto: 2
rear suspension
4.2 Series 1 from 1965: OTS from 1E1237 (RHD) and 1E10979 (LHD), FHC from 1E20639 (RHD) and 1E31003 (LHD ) plus all E-Type 4.2 Series 2 (1968-70)
Richiesto: 2
rear suspension
4.2 Series 1 from 1965: OTS from 1E1237 (RHD) and 1E10979 (LHD), FHC from 1E20639 (RHD) and 1E31003 (LHD ) plus all 4.2 Series 2 (1968-70)
Richiesto: 2
