SU-HD8 internal carburettor
with vent - with hexagonal plastic head
Richiesto: 3
dashpot spring
Richiesto: 3
fixed type. For standard mixture - marked: UM
Richiesto: 3
fixed type for rich mixture - marked: OU
Richiesto: 3
front carburettor
Series 1 3.8 with triple SU-HD8 carburettors (1961-64)
Richiesto: 1
front carburettor
Serie 1 und 2 4.2 with triple SU-HD8 carburettors (1965-70)
Richiesto: 1
centre and rear carburettor
Series 1 3.8 with triple SU-HD8 carburettors (1961-64)
Richiesto: 2
centre and rear carburettor
Series 1 and 2 4.2 with triple SU-HD8 carburettors (1965-70)
Richiesto: 2
for 5/16" throttle spindles with standard size
Length: 115 mm
Richiesto: 1
for 5/16" throttle spindles with 0.010" oversize
Length: 235 mm
Richiesto: 1
idle control - complete kit with spring and washers
Richiesto: 3
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
Richiesto: 6
on rear carburettor
Richiesto: 1
throttle spindle on rear carburettor
Richiesto: 1
for ignition union on front carburettor
Richiesto: 1
with locking nut assembly. SU-HD carburettors with fixed needle
Richiesto: 3
front carburettor
Serie 1 3.8 with triple SU-HD8 carburettors (1961-64)
Richiesto: 3
front carburettor
Serie 1 und 2 4.2 with triple SU-HD8 carburettors (1965-70)
Richiesto: 3
centre and rear carburettor
Series 1 3.8 with triple SU-HD8 carburettors (1961-64)
Richiesto: 3
centre and rear carburettor
Series 1 and 2 4.2 with triple SU-HD8 carburettors (1965-70)
Richiesto: 3
float lid - with hexagonal zinc plated head
Richiesto: 3
float chamber on SU-HD8 carburettors. Made from plated brass, zinc plated, length: 25"
Richiesto: 3
front and centre carburettor
Serie 1 3.8 with triple SU-HD8 carburettors (1961-64)
Richiesto: 2
front and centre carburettor
Serie 1 und 2 4.2 with triple SU-HD8 carburettors (1965-70)
Richiesto: 2
rear carburettor
Serie 1 3.8 with triple SU-HD8 carburettors (1961-64)
Richiesto: 1
rear carburettor
Serie 1 und 2 4.2 with triple SU-HD8 carburettors (1965-70)
Richiesto: 1
for SU carburettors - bore: 0.096"
Richiesto: 3
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat 204291 (ill. 40)
Richiesto: 3
galleggiante - altezza del supporto del coperchio alla sospensione della forcella: 1/4". Si adatta solo al coperchio originale della camera del galleggiante
Richiesto: 3
float - height: 3/8". Fits to float chamber lids 20669 and 20670
Serie 1 und 2 4.2 with triple SU-HD8 carburettors (1965-70)
Richiesto: 3
for SU H & HD type carburettor, diameter: 1.7/8" - unsinkable' float, made from Nitrile rubber foam
Richiesto: 3
front carburettor
Serie 1 3.8 with triple SU-HD8 carburettors (1961-64)
Richiesto: 1
centre and rear carburettor
Serie 1 3.8 with triple SU-HD8 carburettors (1961-64)
Richiesto: 2
front, centre and rear carburettor
Serie 1 and 2 4.2 with triple SU-HD8 carburettors (1965-70)
Richiesto: 3
and spring - inside float chamber lid on SU carburettors
Richiesto: 3
fast idle adjustment
Series 1 3.8 with triple SU-HD8 carburettor (1961-64)
Richiesto: 3
fast idle adjustment
Series 1 and 2 4.2 with triple SU-HD8 carburettor (1965-70)
Richiesto: 3
Richiesto: 3
services one SU-HD8 carburettor. Comprising service kit 200204 plus throttle disc and throttle spindle
Richiesto: 3
