Power steering unit - 4.2 Series 2 (1968-70)
for RHD models - reconditioned, in exchange
Richiesto: 1
for LHD models - reconditioned, in exchange
Richiesto: 1
Adwest power steering rack - feature: steering rack and track rod ends with imperial threads
Richiesto: 1
Richiesto: 1
Richiesto: 1
ball bearing
Richiesto: 1
power steering pinion housing
Richiesto: 1
rack bar
Richiesto: 1
plunger
Richiesto: 1
plunger
Richiesto: 1
retaining screwed plug
Richiesto: 1
spring and plunger
Richiesto: 1
steering
Richiesto: 1
in rack and pinion - please note: this steering rod will be supplied less nut
Richiesto: 2
assembly - including pan, housing, lock tab and tie rod nut adaptor
Richiesto: 2
for steering rod spring - feature: 11.7 mm outer diameter and 2.5 mm thickness
Richiesto: 2
steering rod to rack bar - identified by 2 ears
Richiesto: 2
securing piston on rack
Richiesto: 2
on rack
Richiesto: 1
with 5/8" UNF thread - variant without grease nipple but with a socket for an open-end spanner
Richiesto: 2
with 5/8" UNF thread - variant with grease nipple
Richiesto: 2
track rod end - made from clear nylon
Richiesto: 2
retaining rubber mounting, mounting bracket and upper wishbone to front frame - Lengtht: 3"
Driver side
Richiesto: 1
retaining rubber mounting and mounting bracket to front frame - Length: 1.3/4"
Driver side
Richiesto: 1
retaining rubber mounting, mounting bracket and upper wishbone to front frame - Lengtht: 3"
Passenger side
Richiesto: 1
retaining rubber mounting and mounting bracket to front frame - Length: 1.1/2"
Passenger side
Richiesto: 1
retaining bracket to steering
Passenger side
Richiesto: 2
power steering, passenger side
Richiesto: 1
to servo steering, short - RHD models
Richiesto: 1
to servo steering, short - LHD models
Richiesto: 1
