Sospensione dell'asse anteriore
del braccio della sospensione, anteriore
Richiesto: 2
upper wishbone - front suspension. High quality reproduction
Alternatives
Richiesto: 4
upper wishbone - front suspension
Alternatives
Richiesto: 4
front upper wishbone, inner. Variant with inner sleeve
Alternatives
Richiesto: 4
pivot to crossmember
Richiesto: 4
LH rear
Richiesto: 1
castor angle - 0.036"
Alternatives
Richiesto: 6
castor angle - 0.064"
Alternatives
Richiesto: 6
front suspension. High quality reproduction
Richiesto: 4
- new item
Richiesto: 1
front crossmember to chassis
Alternatives
Richiesto: 2
RH
All Series I - Series II Saloon to 2R4693, 2R58345, 2K2675 and 2K50160 - Series II USA, Canada and Japan exports to 2R58420 - Series II all Coupe - Series II Vanden Plas to 2P2122 and 2P50294
Richiesto: 1
LH
All Series I - Series II Saloon to 2R4693, 2R58345, 2K2675 and 2K50160 - Series II USA, Canada and Japan exports to 2R58420 - Series II all Coupe - Series II Vanden Plas to 2P2122 and 2P50294
Richiesto: 1
RH
Series II Saloon from 2R4694, 2R58346, 2K2676 and 2K50161 - Series II USA, Canada and Japan exports from 2R58421 - Series II Vanden Plas from 2P2123 and 2P50295 - all Series III
Richiesto: 1
LH
Series II Saloon from 2R4694, 2R58346, 2K2676 and 2K50161 - Series II USA, Canada and Japan exports from 2R58421 - Series II Vanden Plas from 2P2123 and 2P50295 - all Series III
Richiesto: 1
front suspension - original Metalastic
Richiesto: 2
del braccio della sospensione - anteriore
Richiesto: 2
lower wishbone - front suspension. Modern type, use together with bolt 208080
Modern type - use together with bolt 208080 (ill. 45)
Richiesto: 2
lower wishbone - front suspension. Modern type, use together with bolt 208080
Richiesto: 2
lower wishbone - front suspension. Modern type, use together with bolt 208080
Richiesto: 2
Use with classic type swivel 207920 (ill. 43)
Richiesto: 8
lower swivel
Part of swivel kit 207920 (ill. 43)
Richiesto: 2
lower swivel - black
Part of swivel kit 207920 (ill. 43)
Richiesto: 2
lower swivel
Part of swivel kit 207920 (ill. 43)
Richiesto: 2
lower swivel
Part of swivel kit 207920 (ill. 43)
Richiesto: 2
lower swivel
Part of swivel kit 207920 (ill. 43)
Richiesto: 2
lower swivel
Part of swivel kit 207920 (ill. 43)
Richiesto: 2
lower swivel
Part of swivel kit 207920 (ill. 43)
Richiesto: 4
RH lower
Series 2 from 1973 and all Series 3
Richiesto: 1
LH lower
Series 2 from 1973 and all Series 3
Richiesto: 1
lower wishbone - front suspension
Alternatives
Richiesto: 4
lower wishbone - front suspension
Richiesto: 4
lower wishbone - front suspension. Variant with inner sleeve
Alternatives
Richiesto: 4
lower wishbone
Identification: both sides interlocked, thickness: 2.7 mm
Richiesto: 4
lower wishbone
Identification: one side interlocked, thickness: 4.65 mm
Richiesto: 2
wishbone bolt
UNF thread - use with our bolt 208077 (ill. 60)
Richiesto: 2
- 5/8"
All Series I - Series II Saloon to 2R3922, 2R53902, 2K2196 and 2K50090 - Series II USA, Canada and Japan exports to 2R53944 - Series II Coupe to 2G1014, 2F1003 and 2F50001 - Series II Vanden Plas to 2P1872 and 2P50055
Richiesto: 1
front anti roll bar with 5/8" diameter
All Series I - Series II Saloon to 2R3922, 2R53902, 2K2196 and 2K50090 - Series II USA, Canada and Japan exports to 2R53944 - Series II Coupe to 2G1014, 2F1003 and 2F50001 - Series II Vanden Plas to 2P1872 and 2P50055
Richiesto: 2
front anti roll bar with 5/8" diameter
All Series I - Series II Saloon to 2R3922, 2R53902, 2K2196 and 2K50090 - Series II USA, Canada and Japan exports to 2R53944 - Series II Coupe to 2G1014, 2F1003 and 2F50001 - Series II Vanden Plas to 2P1872 and 2P50055
Richiesto: 2
- 13/16"
Series II Saloon from 2R3923, 2R53903, 2K2197 and 2K50091 - Series II USA, Canada and Japan exports from 2R53945 - Series II Coupe from 2G1015, 2G50001, 2F1004 and 2F50002 - Series II Vanden Plas from 2P1873 and 2P50056
Richiesto: 1
front anti roll bar - identified by 13/16" inner diameter
Series II Saloon from 2R3923, 2R53903, 2K2197 and 2K50091 - Series II USA, Canada and Japan exports from 2R53945 - Series II Coupe from 2G1015, 2G50001, 2F1004 and 2F50002 - Series II Vanden Plas from 2P1873 and 2P50056 plus all Series III models
Richiesto: 2
front anti roll bar - identified by 13/16" inner diameter
Series II Saloon from 2R3923, 2R53903, 2K2197 and 2K50091 - Series II USA, Canada and Japan exports from 2R53945 - Series II Coupe from 2G1015, 2G50001, 2F1004 and 2F50002 - Series II Vanden Plas from 2P1873 and 2P50056
Richiesto: 2
for anti roll bar bush, outer position with 32 mm outer diameter and 10.3 mm hole diameter
Richiesto: 2
for anti roll bar bush, inner position with 32 mm outer diameter and 11.3 mm hole diameter
Richiesto: 2
RH mounting bracket
Richiesto: 1
LH mounting bracket
Richiesto: 1
RH anti roll bar bush
Richiesto: 1
for anti roll bar bush, inner position with 32 mm outer diameter and 11.3 mm hole diameter
Richiesto: 4