Albero motore
upper bolt
Richiesto: 1
timing chain tensioner
Richiesto: 1
upper and lower - uprated double row endless chain with 180 pitches
Alternatives
Richiesto: 1
upper and lower - aftermarket chain with 180 pitches
Richiesto: 1
- for distributor drive
Richiesto: 1
completo di guaina di Goetze, di dimensioni standard. Caratteristiche: motore 5.3V12 con pistone a 3 anelli e rapporto di compressione 9,0:1. Dimensioni standard del foro: 90 mm
Richiesto: 12
completo di guaina, di dimensioni standard. Caratteristiche: motore 5.3V12 con pistone a 3 anelli e rapporto di compressione 9,0:1. Dimensioni standard del foro: 90 mm
Richiesto: 1
with liner assembly, standard size. Specifications: 3-ring piston, standard bore size: 3.543", compression ratio: 11.5:1 - HE engines (from September 1981)
XJ12 from VIN...326520 to 487641 (1981-92)
Richiesto: 12
dimensioni standard. Caratteristiche: motore 5.3V12 con pistone a 3 anelli e rapporto di compressione 9,0:1. Dimensioni standard del foro: 90 mm
Richiesto: 12
dimensioni standard. Caratteristiche: motore 5.3V12 con pistone a 3 anelli e rapporto di compressione 9,0:1. Dimensioni standard del foro: 90 mm
Richiesto: 1
standard size. Specifications: 3-ring piston, standard bore size: 3.543", compression ratio: 12.5:1
XJ12 from VIN...326520 to 487641 (1981-92)
Richiesto: 1
standard size. Specifications: 3-ring piston, standard bore size: 3.543", compression ratio: 11.5:1 - HE engines (from September 1981)
XJ12 from VIN...326520 to 487641 (1981-92)
Richiesto: 12
for one piston. Standard size for 3 ring piston (2 compression rings, 1 oil ring)
To September 1981 (not HE engines)
Richiesto: 12
standard size - complete car set
From September 1981 (HE engines only)
Richiesto: 1
standard size - for single piston
From September 1981 (HE engines only)
Richiesto: 12
standard size - complete car set
Fits all makes of pistons
Richiesto: 1
fully finished grade 'A' liner with -0.002". Dimensions: 90.0 mm inner diameter and 143.8 mm total height
XJ12 Series I and II, Series III to engine no. 7P42299 (to September 1981, i.e. not HE engines)
Richiesto: 12
XJ12 Series I, Series II to engine no. 7P27699 (1972-75)
Richiesto: 24
XJ12 Series II from engine no. 7P27700 and all Series III (1975-92)
Richiesto: 24
standard size - shaft diameter: 2.30"
Richiesto: 1
+0.010" - shaft diameter: 2.30"
Richiesto: 1
+0.020" - shaft diameter: 2.30"
Richiesto: 1
+0.030" - shaft diameter: 2.30"
Richiesto: 1
Richiesto: 2
crankshaft - reconditioned, in exchange
To engine no. 7P59902
Richiesto: 1
crankshaft - exchange
From engine no. 7P59903 to 7P63783
Richiesto: 1
crankshaft - exchange
From engine no. 7P63784
Richiesto: 1
crankshaft
Richiesto: 1
oil pump
XJ12 Series I, II and III to VIN...431601 (1972-85)
Richiesto: 1
oil pump
XJ12 Series III from VIN...431602 (1985-92)
Richiesto: 1
without bearings - new item
Richiesto: 1
standard size - shaft diameter: 3.001"
Richiesto: 1
with +0.010" oversize - shaft diameter of the standard bearing: 3.001"
Richiesto: 1
with +0.020" oversize - shaft diameter of the standard bearing: 3.001"
Richiesto: 1
with +0.030" oversize - shaft diameter of the standard bearing: 3.001"
Richiesto: 1
new item for vehicles with automatic transmission - identify by 160 teeth ring gear
To engine no. 7P32897
Richiesto: 1
new item for vehicles with automatic transmission - identify by 160 teeth ring gear
From engine no. 7P32898
Richiesto: 1
drive plate - for vehicles with automatic transmission
Richiesto: 1
drive plate
To engine no. 7P32897
Richiesto: 4
drive plate to converter
From engine no. 7P32898 to 7P40652
Richiesto: 6
drive plate to converter
From engine no. 7P40653
Richiesto: 6
Classic XL20W-50
Richiesto: 3
Contenuto: 5 l (9,80 €* / 1 l)
SAE 15W-40
Richiesto: 3
Contenuto: 5 l (8,40 €* / 1 l)
421,90 €*
197,99 €*
