Carburatore SU-H6 parti singole - XK120 da gennaio 1952
for 5/16" throttle spindles with 0.010" oversize
Length: 235 mm
Richiesto: 1
without vent - with hexagonal brass head
Richiesto: 2
with piston
Richiesto: 2
fixed type. For standard mixture - marked: RG
Our recommendation
Richiesto: 2
fixed type. For standard mixture - marked: WO2
Richiesto: 2
fixed type. For standard mixture - marked: RF
Richiesto: 2
front carburettor
Richiesto: 1
rear carburettor
Richiesto: 1
for 5/16" throttle spindles with standard size.
Length: 115 mm
Richiesto: 1
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
Richiesto: 4
for throttle disc return spring
Richiesto: 2
throttle disc
Fixed to the cover band of the starter motor
Richiesto: 2
throttle spindle to carburettor spindle
Richiesto: 1
Coupling link to throttle spindle and carburettor spindle
Richiesto: 2
Coupling link to throttle spindle and carburettor spindle
Richiesto: 2
Coupling link to throttle spindle and carburettor spindle
Richiesto: 2
with cork glands - for rear carburettor
Richiesto: 1
con guarnizioni in gomma moderne - per carburatori tipo SU-H con spillo rigido
Richiesto: 1
front thermo carburettor
Richiesto: 1
float lid - with hexagonal zinc plated head
Richiesto: 2
carburettor. Copy with 2.3/8" diameter
Please use with float lever 3141
Richiesto: 2
for SU carburettors - bore: 0.096"
Richiesto: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat 204291 (ill. 40)
Richiesto: 2
galleggiante - altezza del supporto del coperchio alla sospensione della forcella: 1/4". Si adatta solo al coperchio originale della camera del galleggiante
Richiesto: 2
for SU H & HD type carburettor, diameter: 1.7/8" - unsinkable' float, made from Nitrile rubber foam
Richiesto: 2
and spring - inside float chamber lid on SU carburettors
Richiesto: 2
float chamber and cast pipe to front carburettor
Richiesto: 1
banjo bolt to thermo carburettor cast pipe
Richiesto: 1
banjo bolt and float chamber to carburettor body
Richiesto: 1
banjo bolt to cast pipe
Richiesto: 1
banjo bolt and cast pipe to thermo carburettor
Richiesto: 1
for auxiliary enrichment (thermo) carburettor
Richiesto: 1
for single SU-H4 and SU-H6 type carburettor
Richiesto: 2
for single carburettor
Comprising service kit 200202 (ill. 57) plus throttle disc and throttle spindle
Richiesto: 2