Dynamo and starter motor

M45G inertia drive type with Lucas no. 26062, rotation: clock wise, voltage: 12, drive: 10 teeth - reconditioned, in exchange

XK120, XK140 and XK150 with manual transmission

exchange. M45G inertia drive type

XK140 and XK150 with automatic transmission

for Lucas starter motor M45G and M418G. Supplied in pairs

Lucas C45PVS type - exchange. Luca no.: 22429

XK120 to engine no. W5275

C45 type - reconditioned, in exchange. Dimensions: shaft diameter: 17 mm, PCD of fixing holes: 137 mm, distance between mounting brackets (at the holes): 160 mm, housing diameter: 115 mm

XK120 from W5276, XK140 and XK150

dynamo. Dimensions: 1" x 3/4" and 5/16" thick

XK120 to engine no. W5275

dynamo. Dimensions: 1 x 7/8" and 1/4" thick

XK120 to engine no. W5275

dynamo. Dimensions: 1 x 7/8" and 5/16" thick

XK120 to engine no. W5275

for Lucas C39 and C45 dynamo. Dimensions: 3/4 x 5/8" and 1/4" thick

XK120 from W5276, XK140 and XK150

C45 dynamo

XK140 and XK150

dynamo

XK120

dynamo - runs with 3/8" fan belt

XK140, XK150 to engine no. V1598

dynamo - runs with 1/2" fan belt

XK150 from engine no. V1599 to V5731

C45 dynamo - runs with 1/2" fan belt

XK150 from engine no. V5732

stop light and rear indicator. Reproduction of the Lucas type DB10 with modern electronics and 8 screw terminals

XK120 and XK140, XK150 to 1959: OTS to 820055 (RHD) and 832105 (LHD), DHC to 827463 (RHD) and 838457 (LHD), FHC to 825038 (RHD) and 836489 (LHD)

dynamo. RF95 type with 9 screw-in terminals and two 35 ampere fuses

XK120

C45 dynamo - exchange. RB310 type with 3 screw-in terminals and original cover

XK140 and XK150

per gli alternatori Lucas C42, C47 e C48 DC. Replica dell'RB340 con 30 ampere

con pulsante di avviamento per il motorino di avviamento - modello 2ST

starter solenoid

35 Ampere with 32 mm overall length and 6.2 mm diameter. Packet of five glass type fuses

50 Ampere with 32 mm overall length and 6.2 mm diameter. Packet of five glass type fuses