Heater assembly - from October 1985 to November 1986
for vehicles without air conditioning
Richiesto: 1
heater unit to front panel
Richiesto: 1
blower motor
Richiesto: 1
Richiesto: 4
between heater matrix and pipe to water pump - bottom hose on heater case
Models with carburetter engine
Richiesto: 1
heater matrix to heaterpipe - top hose on heater case
Models with carburetter engine
Richiesto: 1
worm type - for hoses from 7/8" to 1.1/4" diameter
Models with carburetter engine
Richiesto: 2
worm worm drive type with a 12 mm wide stainless steel band - for hoses from 25 to 40 mm diameter
Models with carburetter engine
Richiesto: 4
water outlet to inlet manifold
Models with carburetter engine
Richiesto: 1
water pump to heater pipe
Models with carburetter engine
Richiesto: 1
driver and passenger side
Richiesto: 1
centre position
Richiesto: 2
demister hose
LHD models
Richiesto: 1
demister hose
RHD models
Richiesto: 1
lower part, LH outer position
Richiesto: 1
lower part, RH outer position
Richiesto: 1
lower part, centre position
Richiesto: 2
upper position, centre position
Richiesto: 2
upper position, LH
Richiesto: 1
upper position, RH
Richiesto: 1
retaining ventilation nozzle
Richiesto: 8
demister hose to heater unit
Richiesto: 2
Richiesto: 1
behind the dash
Richiesto: 1
under dash
Richiesto: 2
matt finish. Side panel, RH
Richiesto: 1
matt finish. Side panel, RH
Richiesto: 1
behind the grille. Side panel, RH
Richiesto: 1
behind the grille. Side panel, LH
Richiesto: 1
pad air intake bonnet
Richiesto: 3
air intake filter element in scuttle panel, centre fixing
Richiesto: 3
for the filter under the bonnet air intake grille, LH bracket
Richiesto: 1
for the filter under the bonnet air intake grille, RH bracket
Richiesto: 1
retaining filter pad
Richiesto: 3
air grille, centre position
Richiesto: 2
air grille, LH position
Richiesto: 1
air grille, RH position
Richiesto: 1
rear passenger
Richiesto: 2
outlet engine
EFI models
Richiesto: 1
inlet and outlet
EFI models
Richiesto: 2
worm worm drive type with a 12 mm wide stainless steel band - for hoses from 25 to 40 mm diameter
EFI models
Richiesto: 8
