SU-H4 parti singole carburatore - 1500, 1600, 1622 e De Luxe
without vent - with hexagonal brass head
1500
Richiesto: 2
without vent - with black plastic head
1500
Richiesto: 2
made from plastic
1600, 1622 and De Luxe
Richiesto: 2
dashpot spring
Used with original dashpot springs only
Richiesto: 2
with piston
Richiesto: 2
for SU-H4 carburettors. Chromed with 78 mm total height
Richiesto: 2
marked: GS, for standard mixture
1500
Richiesto: 2
marked: No.4, for weak mixture
1500
Richiesto: 2
marked: No.6, for standard mixture
1600, 1622 and De Luxe
Richiesto: 2
marked: AO, for weak mixture
1600, 1622 and De Luxe
Richiesto: 2
marked: RO, for rich mixture
1600, 1622 and De Luxe
Richiesto: 2
front carburettor
Richiesto: 1
rear carburettor
Richiesto: 1
for 5/16" throttle spindles with standard size. Length: 115 mm
Richiesto: 1
for 5/16" throttle spindles with 0.010" oversize. Length: 235 mm
Richiesto: 1
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
For bodies with worn cast in bushes
Richiesto: 4
for SU-H4 carburettors - variant with standard size
Richiesto: 2
for SU-H4 carburettors - variant with 0.010" oversize
Richiesto: 2
for throttle spindle return spring
Richiesto: 2
throttle spindle on front carburettor
Richiesto: 1
throttle spindle on rear carburettor
Richiesto: 1
with cork glands - for SU-H type carburettors with fixed needle
Richiesto: 2
con guarnizioni in gomma moderne - per carburatori tipo SU-H con spillo rigido
Richiesto: 2
upper
Part of our jet bearing kit 1121 (ill. 31)
Richiesto: 2
jet bearing
Part of our jet bearing kit 1121 (ill. 31)
Richiesto: 4
jet bearing
Part of our jet bearing kit 1121 (ill. 31)
Richiesto: 2
Part of our jet bearing kit 1121 (ill. 31)
Richiesto: 2
lower
Part of our jet bearing kit 1121 (ill. 31)
Richiesto: 2
idle mixture
Part of our jet bearing kit 1121 (ill. 31)
Richiesto: 2
for idle mixture nut
Part of our jet bearing kit 1121 (ill. 31)
Richiesto: 2
jet bearing
Part of our jet bearing kit 1121 (ill. 31)
Richiesto: 2
float lid - with hexagonal zinc plated head
Alternatives
Richiesto: 2
float lid - with hexagonal brass head
Alternatives
Richiesto: 2
carburettor identification 'AUC784'
1500
Richiesto: 2
carburettor identification 'AUC943'
1600, 1622 and De Luxe
Richiesto: 2
float chamber on SU-H and SU-HD carburettors. Made from plated brass, length: 19"
Richiesto: 2
front carburettor
Replacement
Richiesto: 1
rear carburettor
Replacement
Richiesto: 1
for SU carburettors - bore: 0.096"
Richiesto: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat
Richiesto: 2
galleggiante - altezza del supporto del coperchio alla sospensione della forcella: 1/4". Si adatta solo al coperchio originale della camera del galleggiante
Richiesto: 2
float
Fits to the replacement float chamber lids 20669 and 20670 (ill. 52)
Richiesto: 2
for SU H & HD type carburettor, diameter: 1.7/8" - unsinkable' float, made from Nitrile rubber foam
Richiesto: 2
float chamber to carburettor body - feature: 7/16" BSF thread
Early type - engine no. not available
Richiesto: 2
Early type - engine no. not available
Richiesto: 2
Early type - engine no. not available
Richiesto: 4
float chamber to carburettor body - feature: 3/8" BSF thread
Late type - engine no. not available
Richiesto: 2
Late type - engine no. not available
Richiesto: 4
and spring - inside float chamber lid on SU carburettors
Inside float chamber lid
Richiesto: 2
for one SU-H1, H2 or H4 type carburettor
Richiesto: 2
