Strumenti - in mezzo
speedometer - black
848 cc Standard, Van, Pick-up
if speedometer only
Richiesto: 1
speedometer - old english white
848 cc Standard, Van, Pick-up
if speedometer only
Richiesto: 1
for casing - plastic
848 cc Standard, Van, Pick-up
if speedometer only
Richiesto: 2
casing - black
848 cc Standard, Van, Pick-up
if speedometer only
Richiesto: 1
speedometer and gauges
1962 on, except 848 cc Standard, Van, Pick-up
only if 3 gauges
Richiesto: 1
speedometer casing
1962 on, except 848 cc Standard, Van, Pick-up
only if 3 gauges
Richiesto: 1
chrome bezel
1962 on, except 848 cc Standard, Van, Pick-up
only if 3 gauges
Richiesto: 14
retaining casing speedo to inner bulkhead
Richiesto: 6
retaining casing speedo to inner bulkhead
Richiesto: 6
retaining casing speedo to inner bulkhead
RHD only
Richiesto: 2
retaining casing speedo to inner bulkhead
RHD only
Richiesto: 2
Modelli con ruote da 10" e strumentazione centrale (1959-84)
Richiesto: 1
SN4421-00SA with fuel guage - new speedo with 125 mm diameter, black surface with white illumination and chrome bezel. Range: 0-90 MP/H and 0-150 KP/H, final ratio 3.44:1, turns: 1248, mode of operation: mechanical
Mini with 10" wheels and centre mounted instruments (1959-84)
Richiesto: 1
mechanical, 125 mms, black with white printing and clear glass, chrome bezel, range: 0-140 KM/H
for final ratio 3.76:1
Richiesto: 1
mechanical, 125 mms, black with white printing and clear glass, chrome bezel, range: 0-90 MPH
for final ratio 3.76:1
Richiesto: 1
mechanical 200 MP/H speedo SN4421-33. New item with 125 mm diameter, black surface with white illumination and chrome bezel. Turns: 800, final ratio 3.44:1
Cooper S with 10" wheels (1963-80)
Richiesto: 1
SN4421-32 with fuel guage - new speedo with 125 mm diameter, black surface with white illumination and chrome bezel. Range: 0-130 MP/H and 0-200 KM/H, final ratio 3.44:1, turns: 1280, mode of operation: mechanical
Cooper S with 10" wheels and centre mounted instruments (1963-71)
Richiesto: 1
mechanical, 125 mms, magnolia with black printing and clear glass, chrome bezel, range: 0-200 KM/H
for final ratio 3.44:1, Cooper S
Richiesto: 1
SN4421-62 with fuel guage - new speedo with 125 mm diameter, magnolia surface with black illumination and chrome bezel. Range: 0-130 MP/H and 0-200 KM/H, final ratio 3.44:1, turns: 1280, mode of operation: mechanical
Cooper S with 10" wheels and centre mounted instruments (1963-71)
Richiesto: 1
BF6108/00. Nel tachimetro integrato con quadrante nero e lancetta pendente, gamma: E-1/2-F - ricondizionato, in permuta
Richiesto: 1
fitted to back side of speedo - positive earth
MK1
serial number: BR1309/00
Richiesto: 1
fitted to back side of speedo - negative earth
MK2 on
serial number: BR1310/00
Richiesto: 1
30" length - over length
alternative, easy fitting
Richiesto: 1
electrical auxiliary gauge with 52 mm diameter and chrome bezel. Black dial with white illumination and clear glass, overhead pointer with C-N-H range. Requires temperature sensor and voltage stabiliser
3 gauge models except 848 cc standard, Van and Pick-up (1962-80)
Richiesto: 1
auxiliary gauge with 52 mm diameter and chrome bezel. Magnolia dial with white illumination and clear glass, overhead pointer with C-N-H range. Requires temperature sensor and voltage stabiliser
only if 3 gauges
Richiesto: 1
coolant - variant with spade connector
not Cooper S upto 1971
if fitted
Richiesto: 1
with spade connector
Cooper S upto 1971
if fitted
Richiesto: 1
PL2310-00 - mechanical operated auxilary gauge with 52 mm diameter, black dial with clear glass and chrome bezel, range: 0-100 lbs/sqare inch and 0-7 Kg/qcm
models with 3 gauges (1959-80)
Richiesto: 1
PL2328-04C - mechanical operated auxilary gauge with 52 mm diameter, magnolia dial with clear glass and chrome bezel, range: 0-100 lbs/sqare inch and 0-7 Kg/qcm
models with 3 gauges (1959-80)
Richiesto: 1
1/8” x 28 BSP - use with solder nipple 214605 for 1/8" pipe
only if 3 gauges
Richiesto: 1
sealing oilpipe to instrument
only if 3 gauges
Richiesto: 1
between the oil pipes - length: 14.5"
3 gauge models (1962-80)
Richiesto: 1
worm type with 9 mm width - for hoses with 12-14 mm outer diameter
only if 3 gauges
Richiesto: 2
nylon, engine to oil pressure gauge, length: 5"
alternative, only if 3 gauges
Richiesto: 1
Bulkhead at speedo (rota-dip hole)
(1969-89)
Richiesto: 1