Blocco motore 1275 ccm e Cooper S MK3 1275 ccm A Serie
oil pressure operating valve
Richiesto: 1
for higher oil pressure
use together with spring 9240
Richiesto: 1
for higher oil pressure
use together with ball 327229
Richiesto: 1
oil gallery. Diameter: 1/2", total height: 3/8"
alternatives
Richiesto: 2
for water drain tap - 3/32" thick
alternatives
Richiesto: 1
for water drain tap - 1/16" thick
alternatives
Richiesto: 1
for blanking plug 292851
if fitted
Richiesto: 1
oil pipe
only on cars without if oil pressure switch 14956
Richiesto: 1
if tube 8294 is fitted
Richiesto: 1
dipstick - nylon
use together with dipstick 306404
Richiesto: 1
use together with dipstick tube 327237
Richiesto: 1
dipstick - metal
use together with dipstick 306704
Richiesto: 1
filter to block, use with oil filter element
use bolt 6511 if not available
Richiesto: 2
filter to block, use with oil filter element
replaces stud 298337
Richiesto: 2
cylinder head - short
5 if stud 306181 to hold coil bracket is not fitted
Richiesto: 4
cylinder head - medium
if coil bracket fitted to cylinder head
Richiesto: 1
original version
10 needed if head/block fitted with 11 bolts
Richiesto: 9
improved
fitted without washer 212195, 10 needed if head/block fitted with 11 bolts
Richiesto: 10
use if no mechanical fuel pump is fitted
Richiesto: 1
nominal dimensions: 2.78 x 2.76 x 5.56"
Richiesto: 4
distributor drive, variant with groove for 'O' ring
Richiesto: 1
timing cover gasket fiited with 10 screws
if no tensioner is fitted
Richiesto: 1
timing cover gasket fitted with 11 screws
if tensioner is fitted
Richiesto: 1
non-setting gasket and jointing compound
Contenuto: 80 ml (199,88 €* / 1000 ml)
BMC green
Contenuto: 400 ml (72,50 €* / 1000 ml)
matt black
Contenuto: 400 ml (68,18 €* / 1000 ml)