Testa cilindri Cooper S 970 ccm, 1071 ccm, 1275 ccm
without breather
may be small grooves must done to side for the additional headbolts
Richiesto: 1
without breather
from conversions, looks like new
Richiesto: 1
for 11 bolt cylinder head
Indentification: small grooves for head bolt 10 + 11 on left and right side
Richiesto: 1
made from cork
could be used alternative for gasket 305080
Richiesto: 1
genuine type with 14,28 mm diameter
alternatives
Richiesto: 1
reproduction with 14,28 mm diameter
alternatives
Richiesto: 1
with threat for rocker shaft adjusting screw
Richiesto: 1
for adjusting screw
could be used alternative for 8612
Richiesto: 1
without threat for rocker shaft adjusting screw
Richiesto: 3
in rocker arm
Richiesto: 8
rocker arm - 5/16" UNF
for rocker arm 203122
Richiesto: 8
rocker arm adjusting srew, 5/16" UNF
for rocker arm 203122
Richiesto: 8
rocker arm - 1/4" UNF
alternative, if threat smaller than 5/16"
Richiesto: 8
rocker arm adjusting screw - 1/4" UNF
alternative, if threat smaller than 5/16"
Richiesto: 8
rocker arm outlet to rocker pedestal
Richiesto: 6
steel, Inlet and exhaust valve, tappered nose
Richiesto: 8
bronze, inlet and exhaust valve, tappered nose
Richiesto: 8
diameter: 35,6 mm length: 89,5 mm
970cc 1964-66, 1071 cc 1963-64, 1275 cc 1964-67, cylinder head with casting: AEG163
Indentification: smal collet groove
Richiesto: 4
diameter: 30,97 mm length: 89,6 mm
970cc 1964-66, 1071 cc 1963-64, 1275 cc 1964-67, cylinder head with casting: AEG163
Indentification: smal collet groove
Richiesto: 4
diameter: 35,6 mm length: 90,9 mm
1275 cc 1968-71 Mk3, cylinder head with casting: 12G940
Indentification: small collet groove
Richiesto: 4
diameter: 29,44 mm length: 90,8 mm
1275 cc 1968-71 Mk3, cylinder head with casting: 12G940
Indentification: small collet groove
Richiesto: 4
top
for valves with small collet groove
Richiesto: 8
for bypass hose
also used by cast iron water pumps
Richiesto: 1
large port specification
if LCB-Manifold fitted or bigger ports
Richiesto: 1
classic copper gasket on metal layer for engines up to 1340 cc
alternatives
Richiesto: 1
classic soft material gasket on metal layer
Richiesto: 1
classic soft material gasket on metal layer with special sealing ring for the oil feed
alternatives
Richiesto: 1
only used if no heating tap is mounted
Richiesto: 1
non-setting gasket and jointing compound
Contenuto: 80 ml (199,88 €* / 1000 ml)
standard type
alternatives
Richiesto: 1
with classic soft material head gasket on metal layer with special sealing ring for the oil feed
alternatives
Richiesto: 1
with classic copper gasket on metal layer
alternatives
Richiesto: 1
