+39 011 074 4255 | +39 348 397 2810

Oil seal conversion kit

Codice prodotto: 337156
crankshaft rear - for vehicles with steel oil sump with groove in the rear recess of the oil sump. It is mounted on the inner side of the crankshaft flange, so the crankshaft needs to be processed at the former sealing surface. During an engine … Leggi di più

416,50 €*

% 474,83 €* Prezzi incl. IVA più costi di spedizione
Codice prodotto: 552228
20,17 €*
Richiesto: 2
Info sui prodotti "Oil seal conversion kit"

Jaguar: XK120, XK140 and XK150 (1949-61) • Mk7, Mk8 and Mk9 (1950-61) • E-Type 3.8 Series 1 (1961-64) • Mark I 3.4 (1955-59) • Mark II 2.4, 3.4, 3.8 and 340 (1959-69) plus 240 with steel oil sump (1967-69) • Mk10 3.8 (1961-64) • XJ6 3.4 Series II and III (1975-87)

crankshaft rear - for vehicles with steel oil sump with groove in the rear recess of the oil sump.
It is mounted on the inner side of the crankshaft flange, so the crankshaft needs to be processed at the former sealing surface. During an engine overhaul these changes can be easily done while grinding the crankshaft

The crankshaft in the XK engine is sealed with sealing cord or a scroll on the back of the crank. Both technical solutions have been state of the art the time, the engine has been designed and developed. Till today, both sealing methods are still usable, as long as you tolerate one or another oil drop underneath the car. But as soon as the engine gets an overhaul, it is time to think about a more appropriate sealing method.
Two different sealing kits for the crankshaft are available, both based on a modern radial shaft seal, designed to stop oil leakages. The sealing kits work on both types of engines, can be used with steel- or aluminium oil sumps and can be mounted with reasonable effort, as long as the crankshaft is removed.
Comprehensive installation instructions come with the kit.