Wire wheel hubs for Morgan
LH front - 42 mm fitting with 8 TPI
Plus 4 (1950-69) • 4/4 Series II, III, IV, V and 1600 (1955-85)
Richiesto: 1
RH front - 42 mm fitting with 8 TPI
Plus 4 (1950-69) • 4/4 Series II, III, IV, V and 1600 (1955-85)
Richiesto: 1
3HA and 7HA Salisbury rear axle, LH - 42 mm fitting with 8 TPI
Plus 4 (1950-66) • 4/4 Series II and III plus early Series IV (1955-66)
Richiesto: 1
3HA and 7HA Salisbury rear axle, RH - 42 mm fitting with 8 TPI
Plus 4 (1950-66) • 4/4 Series II and III plus early Series IV (1955-66)
Richiesto: 1
BTR rear axle, LH - 42 mm fitting with 8 TPI
Plus 4 (1966-69) • 4/4 Series IV, V and 1600 (1966-85)
Richiesto: 1
BTR rear axle, RH - 42 mm fitting with 8 TPI
Plus 4 (1966-69) • 4/4 Series IV, V and 1600 (1966-85)
Richiesto: 1
LH front - 42 mm fitting with 8 TPI
4/4 1600 with Ford CVH EFI engine (1991-93) • 4/4 1800 (1993-2009) • 4/4 1.6 Litre (2009-12)
Richiesto: 1
RH front - 42 mm fitting with 8 TPI
4/4 1600 with Ford CVH EFI engine (1991-93) • 4/4 1800 (1993-2009) • 4/4 1.6 Litre (2009-12)
Richiesto: 1
LH rear - 42 mm fitting with 8 TPI
4/4 1600 with Ford CVH EFI engine (1991-93) • 4/4 1800 (1993-2009) • 4/4 1.6 Litre (2009-12)
Richiesto: 1
RH rear - 42 mm fitting with 8 TPI
4/4 1600 with Ford CVH EFI engine (1991-93) • 4/4 1800 (1993-2009) • 4/4 1.6 Litre (2009-12)
Richiesto: 1
RH. Bolt-on unit for front and rear: Pitch circle diameter: 5", unless fitted as original equipment. Please note: will increase the track by approximately 1.25" per wheel
Plus 8 (1968-93)
LH. Bolt-on unit for front and rear: Pitch circle diameter: 5", unless fitted as original equipment. Please note: will increase the track by approximately 1.25" per wheel
Plus 8 (1968-93)