Brake pipes and brake hoses
single supply. Complete unit with filler cap and gasket
BN1 and BN2
Benodigd: 1
dual supply type. Complete unit with filler cap and gasket
From BN4-48863 to BJ8
Benodigd: 1
only 1 required for BN1 and BN2
Benodigd: 2
only 1 required for BN1 and BN2
Benodigd: 2
between brake master cylinder resp. clutch master cylinder and reservoir on LHD models
BN1 and BN2 (1953-56)
Benodigd: 1
between brake master cylinder resp. clutch master cylinder and reservoir on RHD models
BN1 and BN2 (1953-56)
Benodigd: 1
between brake master cylinder and reservoir on LHD models
BN4 to BJ8 (1956-68)
Benodigd: 1
between brake master cylinder and reservoir on RHD models
BN4 to BJ8 (1956-68)
Benodigd: 1
brake fluid reservoir
BN1 and BN2
Benodigd: 1
brake fluid reservoir
BN1 and BN2
Benodigd: 1
supply tank
From BN4-48863 to BJ8
At LHD models with triple carburettor the bracket must be modified.
Benodigd: 1
supply tank on RHD models
From BN4-48863 and all BN6 to BJ8. Please note: at LHD models with triple carburettor the bracket must be modified
Benodigd: 1
brake master cylinder to connectorbrake master cylinder to connector
BN4 to BJ7 - no brake servo fitted
Benodigd: 1
5 way type
BN1 to BJ7 - no brake servo fitted
Benodigd: 1
BN7, BN7, BJ7 and BJ8 - with brake servo
Benodigd: 1
hydraulic switch with screw-in terminals and 1/8" x 27 NPTF thread
BN1 to BJ7
Benodigd: 1
hydraulic switch with lucar terminals and 1/8" x 27 NPTF thread
BN1 to BJ7 (3/8” BSF thread) - no brake servo fitted
Benodigd: 1
BN7, BN7, BJ7 and BJ8 (3/8” UNF thread) - with brake servo
Benodigd: 1
hydraulic switch with two lucar terminals and 3/8"-24 UNF thread with cone seat on the end
BN7, BN7, BJ7 and BJ8 (3/8” UNF thread) - with brake servo
Benodigd: 1
3/8" x 24 UNF - for 3/16" pipe
BN7, BN7, BJ7 and BJ8 - with brake servo
Benodigd: 1
3/8" x 24 UNF - for 3/16" pipe
BN1 from 156814, BN2 to BJ8
Benodigd: 1
BN1 to 156813
Alternatively connector 202384 (illustration 38) can be used.
Benodigd: 1
connector
BN1 and BN2
Benodigd: 1
brake union
BN6 and BN7
Benodigd: 1
brake pipe to balance lever
BN1 to 221535
Benodigd: 1
brake pipe to balance lever
From BN1-221536 to BJ8
Benodigd: 1
brake pipe to brake servo
BN7, BT7, BJ7 and BJ8 - with brake servo
Benodigd: 1
front
BN1 to 156813
Alternatively brake hose 336493 (ill. 50) can be used.
Benodigd: 2
brake pipe to rear axle, left hand
From BN1-221536 to BJ8
Benodigd: 1
front brakes
BN1 from 156814, BN2, BN4 and BN6
Benodigd: 2
brake hose to brake caliper
BN7, BT7, BJ7 and BJ8
Benodigd: 2
brake pipe to brake fluid reservoir
BN1 and BN2
Benodigd: 1
brake pipe to brake fluid reservoir
From BN4-48863 to BJ8 - LHD
Benodigd: 1
voor automatische hernieuwing/luchtverversing van de hydraulische rem of koppeling pedaal systemen
Benodigd: 1
the one man tool. Using a one way system, the fluid is allowed through the valve but the air is prevented from returning back into the system
Benodigd: 1
RVS ommanteld. Set van 3 stuks
BN7, BT7, BJ7 en BJ8 (1959-68)
Benodigd: 1
3/8" x 24 UNF, length 20.5 mm, 3/16” pipe conical
Benodigd: 1
7/16" x 24 UNS with 15 mm length - fits 1/4" pipe
Benodigd: 1
3/8" x 24 UNF, length 17.5 mm- for 3/16" pipe
Benodigd: 1
7/16" x 20 UNF with 18.6 mm length - for 1/4" pipe
Benodigd: 1
€ 105,80*
