Dashboard 3.8 and 4.2 Series 1 OTS and FHC (1961-67)
this black plasic cover is moulded perfectly to match clean at your existing dashboard
Benodigd: 1
demister nozzle - dashboard centre
OTS models
Benodigd: 1
dashboard, outer section, RH
Benodigd: 1
dashboard, outer section, LH
Benodigd: 1
Benodigd: 1
RH section with recess for speedometer and rev. counter. For RHD models
Benodigd: 1
LH section with recess for speedometer and rev. counter. For LHD models
Benodigd: 1
LH section with recess for glove box. For RHD models
Benodigd: 1
RH section with recess for glove box. For LHD models
Benodigd: 1
grab handle at side of dashboard - stainless steel reproduction
Benodigd: 2
under dashboard - 3-piece black millboard set for RHD models without air conditioning
Benodigd: 1
under dashboard - 3-piece black millboard set for LHD models without air conditioning
Benodigd: 1
in aluminium, with 'Polka Dot' pattern
3.8 Series 1 (1961-62) - OTS to 850609 and 878301
Benodigd: 1
3.8 Series 1 OTS from 850001 to 850943 (RHD) and from 875001 to 881887 (LHD), FHC from 860001 to 861799 (RHD) and from 885001 to 890873 (LHD) (1961-64)
Benodigd: 1
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Benodigd: 1
and mesh for radio speaker
3.8 Series 1 OTS from 850001 to 850943 (RHD) and from 875001 to 881887 (LHD), FHC from 860001 to 861799 (RHD) and from 885001 to 890873 (LHD) (1961-64)
Benodigd: 2
radio speaker
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Benodigd: 2
radio console, front
3.8 Series 1 OTS from 850001 to 850943 (RHD) and from 875001 to 881887 (LHD), FHC from 860001 to 861799 (RHD) and from 885001 to 890873 (LHD) (1961-64)
Benodigd: 1
radio console, front
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Benodigd: 1
retaining blanging plate to radio console
Benodigd: 2
retaining blanging plate to radio console
Benodigd: 2
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Benodigd: 1
ash tray blanking plate
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Benodigd: 1
ash tray
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Benodigd: 1
ash tray - complete with mounting kit
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Benodigd: 1
with 'leaping cat' logo - chromed
3.8 Series 1 OTS from 850001 to 850943 (RHD) and from 875001 to 881887 (LHD), FHC from 860001 to 861799 (RHD) and from 885001 to 890873 (LHD) (1961-64)
Benodigd: 1
'Leaping Cat' on ashtray. Length approx. 30 mm, comes with stud and nut assembly
3.8 Series 1 OTS from 850001 to 850943 (RHD) and from 875001 to 881887 (LHD), FHC from 860001 to 861799 (RHD) and from 885001 to 890873 (LHD) (1961-64)
Benodigd: 1
chromed - required when radio is not fitted
Benodigd: 1
gearbox tunnel - fibreglass replacement
3.8 Series 1 plus 4.2 Series 1 OTS to 1E20102 (RH) and 1E10359 (LHD), FHC to 1E20102 (RHD) and 1E30349 (LHD) (1961-1964)
Benodigd: 1
gearbox tunnel - fibreglass replacement
Jaguar: E-Type 4.2 Series 1 OTS from 1E20103 (RH) and 1E10360 (LHD) plus FHC from 1E20103 (RHD) and 1E30350 (LHD) plus 2+2 with manual transmission from 1E50001 (RHD) and 1E75001 (LHD), all 4.2 Series 2 with manual transmission (1964-1970)
Benodigd: 1
rubber type
4.2 Series 1 without gear lever grommet (1964): FHC from chassis no. 1E20001 to 1E20102 (RHD) and from 1E30001 to 1E30349 (LHD), OTS from chassis no. 1E1001 to 1E1060 (RHD) and from 1E10001 to 1E10359 (LHD)
Benodigd: 1
rubber type
4.2 Series 1 with gear lever grommet (1964): FHC from chassis no. 1E20104 (RHD) and from 1E30351 (LHD), OTS from chassis no. 1E1062 (RHD) and from 1E10361 (LHD)
Benodigd: 1
gearbox tunnel
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Benodigd: 1
mild steel
3.8 Series 1 OTS from 850001 to 850943 (RHD) and from 875001 to 881887 (LHD), FHC from 860001 to 861799 (RHD) and from 885001 to 890873 (LHD) (1961-64)
Benodigd: 1
mild steel
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Benodigd: 1
remode control
3.8 Series 1 from OTS 850001 to 850609 (RHD) and 875001 to 878301 (LHD), FHC from 860001 to 860912 (RHD) and 885001 to 887131 (LHD) (1961-1962)
Benodigd: 1
remode control
3.8 Series 1 from OTS 850610 (RHD) and 878302 (LHD), FHC from 860913 (RHD) and 887132 (LHD) (1962-1964)
Benodigd: 1
remode control
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Benodigd: 1
gear lever gaiter
3.8 and 4.2 Series with riveted shift lever cover OTS up to 1E1060 (RHD) and 1E10359 (LHD), FHC up to 1E20102 (RHD) and 1E30349 (LHD) (1961-64)
Benodigd: 1
gear lever gaiter
4.2 Series 1 from 1E1061 (RHD) and 1E10360 (LHD), FHC from 1E20103 (RHD) and 1E30350 (LHD) (1965-70)
Benodigd: 1
retaining chrome escutcheon on the housing
3.8 and 4.2 Series with riveted shift lever cover OTS up to 1E1060 (RHD) and 1E10359 (LHD), FHC up to 1E20102 (RHD) and 1E30349 (LHD) (1961-64)
Benodigd: 14
without arm rest
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Benodigd: 1
centre arm rest
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Benodigd: 1
retaining hinge
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Benodigd: 6
armrest hinge
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD)(1964-67)
Benodigd: 1
for demister nozzles in dashboard - five piece kit in black
FHC models
Benodigd: 1
for demister nozzles in dashboard - five piece kit in black
OTS models
Benodigd: 1