Dynamo and control box - 3.8 Series 1 (1961-64)

Type: C42. Opmerking: 15 mm asdiameter - op omruil

Nieuw onderdeel. Replica van de alternator van het type Lucas C42. Afmetingen: Diameter as: 15 mm, afstand tussen montagegaten: 145 mm, afstand tussen voor- en achterschild: 164 mm, diameter behuizing: 108 mm

Austin Healey: BJ8 (1963-68) Jaguar: E-Type 3.8 serie 1: RHD OTS van 850092, LHD OTS van 875386, RHD FHC van 860005, LHD FHC van 885021 - Mark II: 2.4 van motornummer BH9010, 240 modellen met speciale uitrusting, 3.4, 340 en 3.8 zonder stuurbekrachtiging vanaf de motornummers KH8317 en LC5345 - S-Type: alle modellen 3.4 en 3.8 zonder stuurbekrachtiging, behalve de modellen met speciale uitrusting (1963-68) Land Rover: Series IIA: 2.6 liter benzinemotor (1967-71)

for Lucas C45 dynamo. Dimensions: 3/4 x 5/8" and 1/4" thick

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

for Lucas C42 dynamo

3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

commutator end bracket on Lucas C45 dynamo

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

commutator end bracket on Lucas C42 dynamo

3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

dynamo - runs with 1/2" fan belt

3.8 Series 1 from engine no. R1001 to R5249 (1961-63)

dynamo - variant for duplex type fan belt

3.8 Series 1 from engine no. R5250 (1963-64)

dynamo

3.8 Series 1 to engine no. R1509 (1961)

for Lucas C45 dynamo

3.8 Series 1 from engine no. R1510 (1961-64)

retaining pulley

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

retaining pulley

3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

retaining pulley

securing dynamo at bottom to mounting bracket

retaining dynamo to adjusting link

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

retaining dynamo to adjusting link

3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

retaining dynamo to adjusting link

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

retaining dynamo to adjusting link

3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

retaining dynamo to adjusting link

retaining dynamo to adjusting link

mounting dynamo

dynamo to engine

dynamo to engine

for Lucas C45 dynamo - exchange. RB310 type with 3 screw-in terminals and original cover

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

securing control box

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

securing control box

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

control box

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

for Lucas C42, C47 and C48 dynamo. RB340 type with 30 ampere

3.8 Series 1 OTS drom 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

retaining control box

3.8 Series 1 OTS drom 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

retaining control box

3.8 Series 1 OTS drom 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

retaining bracket to vehicle

retaining bracket to vehicle