External electrics and wiring harnesses
with 7" diameter. Light unit with clear lens, curved glass and E marking. Fits to RHD models without pilot
Benodigd: 2
for RHD models. 12 volt, 50/40 watt, P36D British pre-focus base, clear bulb surface
Benodigd: 2
for LHD models. 12 volt, 50/40 watt, P36D British pre-focus base, clear bulb surface
Benodigd: 2
for BPF bulbs, with Lucar terminals for harness 6486
Benodigd: 2
PL700 type with clear, curved lens. 7" version without pilot for RHD models. These headlamps look period correct but are only compatible with H4 bulbs
Use bulb 3496
Benodigd: 2
with clear lens and built-in 65/55 watt bulb, RHD, no pilot - 7" diameter
Benodigd: 2
with clear lens and built-in 60/35 watt bulb, LHD, no pilot - 7" diameter
Benodigd: 2
R/H, Flat lense
Early cars only
Benodigd: 2
for 7" headlamp - chromed clip-on type for headlamp bowl with 2 adjusting screws
Benodigd: 2
for 7" headlamp, complete unit with retaining rim. Metal variant for bowl with 2 adjusters
Benodigd: 2
with 7" diameter, made from plastic. Complete with inner rim, rubber seal and adjuster kit
Benodigd: 2
headlamp chrome rim - wide type without cutout
Benodigd: 2
for 7" headlamp bowl with 2 adjusting screws
Benodigd: 2
with 7" diameter, made from metal - 2 adjuster variant
Benodigd: 2
12 volt, 45/40 watt
Spade fitting for original type L/H drive headlights
Benodigd: 2
with plug - for H4, Sealed Beam and Bilux headlamps without pilot
To adapt type 410 and sealed beam
Benodigd: 2
Parkeerlicht, gemonteerd op het spatbord - wit glazen lens, vastgehouden met chromen ring - Type: Type L490
Mark II (1959-69) • Daimler 250 V8 limousine (1962-69)
Benodigd: 2
sidelight to housing
Only for vehicles with OE sidelight
Benodigd: 2
sidelight to housing
Only for vehicles with Limora sidelight
Benodigd: 2
12 volt, 5 watt, BA9s bajonett base, clear bulb surface - side lamp
Benodigd: 2
voorrichtingaanwijzer - oranje glazen lens, vastgehouden met chromen ring - Type: L563
Benodigd: 2
front indicator, clear glass lens, retained by chrome ring
Benodigd: 2
and chrome rim, front indicator - amber glass type L563
Benodigd: 2
and chrome rim, front indicator - clear glass type L563
Benodigd: 2
front indicator - clear glass type: L563
Benodigd: 2
12 volt, 21 watt, BAY15s bajonett base, clear bulb surface - indicator, rear fog lamp
Benodigd: 2
replica of the FL5 flasher relay with 3 screw-in terminals and round housing
Benodigd: 1
replica of the FL5 flasher relay with 3 Lucar terminals and round housing
Benodigd: 1
FL5 flasher relay with 3 terminals and round housing
Benodigd: 1
"Fogranger", diameter 5.3/4 ". Rooster met verchroomd huis. Bevestiging aan de achterlichtpot
Benodigd: 2
12 volt, 48 watt, P36S British pre-focus base, clear bulb surface - fog lamps
Benodigd: 2
for period style fog lamp 'Fogranger' with 5.3/4" diameter
Benodigd: 2
Auxiliary FT11
Benodigd: 2
for 6" fog/spot lamps - chrome
Lucas 576 fog light
Benodigd: 2
for fog and spot lamps with 5.3/4" diameter
Lucas 576 fog light
Benodigd: 2
for 7" fog/spot lamps - chrome
Lucas 700 fog light
Benodigd: 2
for fog/spot lamps upto 7"
Lucas 700 fog light
Benodigd: 2
stop and tail light in rear lamp - red plastic lens, type: L627
Benodigd: 2
12 volt, 21 watt, BAY15s bajonett base, clear bulb surface - indicator, rear fog lamp
Benodigd: 2
12 volt, 21/5 watt, BAY15d bajonet base, clear bulb surface - stop and tail lamp
Benodigd: 2
hydraulic switch with lucar terminals and 1/8" x 27 NPTF thread
Benodigd: 1
reverse lamp
Benodigd: 1
number plate lamp
Benodigd: 3
12 volt, 5 watt, BA9s bajonett base, clear bulb surface - number plate lamp
Benodigd: 3
12 volt, 21 watt, BAY15s bajonett base, clear bulb surface - indicator, rear fog lamp
Benodigd: 2
reverse and number plate lamp - clear plastic type L512
Benodigd: 1
H4 - 12 volt, 60/55 watt, unified European P43t base, clear bulb surface
As original
Benodigd: 2
H4 -12 volt, 60/55 watt, unified European P43t base, clear Xenon bulb surface
Benodigd: 2
H4 - 12 volt, 100/80 watt, unified European POR43t base, clear bulb surface
Benodigd: 2
12 volt, 45/40 watt, unified European P45t base, clear bulb surface
type 410 for original L/H drive headlights (expect France)
Benodigd: 2
for RHD models. 12 volt, 50/40 watt, P36D British pre-focus base, clear bulb surface
type 414 - R/H drive headlights (except France). For later replacement headlights.
Benodigd: 2
for LHD models. 12 volt, 50/40 watt, P36D British pre-focus base, clear bulb surface
type 415 - L/H drive headlights (except France). For later replacement headlights.
Benodigd: 2
12 volt, 5 watt, BA9s bajonett base, clear bulb surface - side lamp, number plate lamp
Sidelight, map light, interior lamp at top of centre pillars, map lamp, Number plate lamp and boot lamp, etc
12 volt, 21 watt, BAY15s bajonett base, clear bulb surface - indicator, rear fog lamp
rear flasher light, reversing light
Benodigd: 3
12 volt, 48 watt, P36S British pre-focus base, clear bulb surface - fog lamps
Fog light
Benodigd: 2
12 volt, 21/5 watt, BAY15d bajonet base, clear bulb surface - stop and tail lamp
Brake and tail light
Benodigd: 2
12 volt, 2.2 watt, E10/13 screw base, clear bulb surface - instrument panel and interior lamp
Headlight warning, ignition warning, fuel warning, choke control warning (2.4 only), manual electric choke warning (not 2.4), hazard warning, heated rear window warning, hadbrake/brake fluid level warning, etc.
12 volt, 2.0 watt, BA7S bajonet base, clear bulb surface - instrument and switch illumination
Flasher indicator warning, indicatorstrip illumination, overdrive indicator, automatic transmission indicator, etc.
6 watt festoon type
Glove box lamp, interior lamp in rear quarters
Benodigd: 3
high note, Lucas HF.1748 type with 2 terminals. 12 volt - reconditioned, in exchange
Benodigd: 1
low note, Lucas HF.1748 type with 2 terminals. 12 volt - reconditioned, in exchange
Benodigd: 1
Originele „Slakkenhuis"-claxon, Slakkenhuis van gegoten aluminium en plaatstalen behuizing, Hoge toon
Benodigd: 1
Originele „Slakkenhuis"-claxon, Slakkenhuis van gegoten aluminium en plaatstalen behuizing, Lage toon
Benodigd: 1
with plug - for H4, Sealed Beam and Bilux headlamps without pilot
No sidelight
Benodigd: 2
Headlight, fog lamp, side lamp and indicator
Benodigd: 1
For R/H drive. For L/H drive 13 required. For screen washer tubes, speedometercable, bonnet lock control, screen wiper cable, dipswitch cable, petrol tank cable, boot lid cable, door switches, brake pipes and side lamps.
Benodigd: 12
Hole for L/H dipswitch cable (R/H drive models only), redundant speedo cable hole in bulkhead, hole for screen washer tubing and redudant cable entry hole in bulkhead.
Benodigd: 4
outer diameter: 40 mm, for 32 mm hole and 4 mm cable
Body harness, and dipswitch on R/H drive
Benodigd: 1
outer diameter: 40 mm, for 32 mm hole and 10 mm cable
Body harness through sills
Benodigd: 4
outer diameter: 53 mm, for 38 mm hole and 32 mm cable
Forward harness
Benodigd: 1
outer diameter: 46 mm, for 29 mm hole and 25 mm cable
At rear of body for body harness
Benodigd: 2
made from rubber with 47 mm outer diameter - for 38 mm hole and 10 mm cable, total height: 7.7 mm
Lamp cables
Benodigd: 2
outer diameter: ?? mm, for 12.7 mm hole and 4 mm cable
In centre pillars
Benodigd: 2
outer diameter: 32 mm, for 19 mm hole and 14 mm cable
Heater control through scuttle
Benodigd: 2
outer diameter: 32 mm, for 19 mm hole and 14 mm cable
Instrument panel wing. Required only with steering column connector cable.
Benodigd: 1
transmission cable access hole
Automatic only
Benodigd: 1
Transmission dipstick hole. Automatic only
Benodigd: 1
for wiring loom - supplied in set of 30
Benodigd: 1
