Cylinder head MKII
rear crankshaft cover to cylinder block - diameter: 5/16"
Benodigd: 16
on studs
Original 'D' washer no longer available. Use washer 212193 with spring washer 212194
Benodigd: 16
on studs
Original 'D' washer no longer available. Use washer 212193 with spring washer 212194
Benodigd: 16
fixing cylinder head to front timing cover and cylinder block
Benodigd: 4
fixing cylinder head to front timing cover and cylinder block
Benodigd: 4
fixing cylinder head to front timing cover and cylinder block
Benodigd: 4
inlet and exhaust manifold. Set with 34 short stainless steel studs
Benodigd: 1
exhaust manifold, length: 1.5/8" - stainless steel
Benodigd: 16
exhaust manifold, length: 1.3/4" - for gearbox breather
Benodigd: 2
7/16" - galvanised D-shaped washer for cylinder head dome nut
7/16" - galvanised 3.4 mm thick washer for cylinder head dome nut
gemaakt van chroomnikkel-magnesiumstaal met genitreerd oppervlak. Diameter: 41,3 mm
Benodigd: 6
gemaakt van chroomnikkel-magnesiumstaal met genitreerd oppervlak. Diameter: 41,3 mm
Benodigd: 6
set with one inner and one outer spring
Benodigd: 6
top, for inlet valve and exhaust valve - aftermarket
Benodigd: 12
inlet valve - bronze valve guide with 0.502" outside diameter and 1.866" length
Benodigd: 6
inlet valve +0.003" (1st oversize). Steel type
Benodigd: 6
inlet valve - bronze valve guide with 0.507" outside diameter and 1.866" length
Benodigd: 6
inlet valve, 2nd oversize with 12.85 mm outer diameter and 47.41 mm length. Steel type
Benodigd: 6
inlet valve - bronze valve guide with 0.504" outside diameter and 1.866" length
Benodigd: 6
inlet valve, 3rd oversize with 12.95 mm outer diameter. Steel type
Benodigd: 6
inlet valve - bronze valve guide with 0.510" outside diameter and 1.866" length
Benodigd: 6
exhaust valve, 1st oversize with 12.83 mm outer diameter. Steel type
Benodigd: 6
exhaust valve - bronze valve guide with 0.506" outside diameter and 1.957" length
Benodigd: 6
exhaust valve, 2nd oversize with 12.88 mm outer diameter. Steel type
Benodigd: 6
exhaust valve - bronze valve guide with 0.507" outside diameter and 1.957" length
Benodigd: 6
exhaust valve, 3rd oversize with 12.95 mm outer diameter. Steel type
Benodigd: 6
exhaust valve - bronze valve guide with 0.510" outside diameter and 1.957" length
Benodigd: 6
inlet valve. Hardened version for lead free applications. Dimensions: OD = 1.85", ID = 1.437", H = 0.394"
3.4 and 340 engines
Benodigd: 6
inlet valve. Hardened version for lead free applications. Dimensions: OD = 1.88", ID = 1.38", H = 0.43"
3.8 engine
Benodigd: 6
exhaust, hardened, semi finished. For lead free applications - dimensions: outer diameter: 42,9 mm inner diameter: 33,45 mm heigth: 6,15 mm
Benodigd: 6
voor Jaguar XK6 motoren en 6.0 V12 motoren (diameter 17,44 mm <> 0,6126 inch)
Benodigd: 1
tachometer - on inlet camshaft
Benodigd: 1
polished aluminium - set of two.For cars fitted with electric tachometer. Features: Recess on LH exhaust cover: 29 mm, recess on RH inlet cover: 46 mm
Benodigd: 1
raw aluminium - set of two.For cars fitted with electric tachometer. Features: Recess on LH exhaust cover: 29 mm, recess on RH inlet cover: 46 mm
Benodigd: 1
RH - polished aluminium. Feature: slot for electric tachometer drive
Benodigd: 1
for LH smooth rocker cover. Made of polished aluminium with 68 mm diameter
Early models with smooth rocker cover
Benodigd: 1
oil filler cap
Early models with smooth rocker cover
Benodigd: 1
for left rocker cover
Later models with ripped rocker cover
Benodigd: 1
oil filler cap
Later models with ripped rocker cover
Benodigd: 1
engine breather
Very early models - not breathing thru' air cleaner. Quote engine no.
Benodigd: 1
engine breather air hose
Very early models - not breathing thru' air cleaner. Quote engine no.
Benodigd: 2
engine breather - 90° angled
Models breathing through air cleaner. Some earlier models are fitted with an elbow hose for the breather housing whilst later models have a straight hose, repeated at the air cleaner end. Both are of a similar diameter. Qute engine no.
Benodigd: 2
engine breather - 78 cm long
Models breathing through air cleaner. Some earlier models are fitted with an elbow hose for the breather housing whilst later models have a straight hose, repeated at the air cleaner end. Both are of a similar diameter. Qute engine no.
Benodigd: 2
engine breather hose
Models breathing through air cleaner. Some earlier models are fitted with an elbow hose for the breather housing whilst later models have a straight hose, repeated at the air cleaner end. Both are of a similar diameter. Qute engine no.
Benodigd: 4
versterkte composite pakking, Voor 3.4 Motor
Benodigd: 1
Versterkte composite pakking, voor 3.8 Motor
Benodigd: 1
versterkte composite pakking, Full Race, 3.8-Motor
Benodigd: 1
down pipe to exhaust manifold - inner diameter: 51 mm, total height: 12.5 mm
Mark II (1961-69): 2.4 from 112355 and 126735, 3.4 from 158296 and 177750, 3.8 from 230001 and 219614 plus all 240 and 340 models
Benodigd: 2
down pipe to exhaust manifold - inner diameter: 51 mm, total height: 12.5 mm
Mark II (1961-69): 2.4 from 112355 and 126735, 3.4 from 158296 and 177750, 3.8 from 230001 and 219614 plus all 240 and 340 models
Benodigd: 2
front. Please note: no guarantee for enamel
3.4 and 3.8
Benodigd: 1
front. Please note: no guarantee for enamel
2.4 and 240
Benodigd: 1
rear. Please note: no guarantee for enamel
3.4 and 3.8
Benodigd: 1
rear. Please note: no guarantee for enamel
2.4 and 240
Benodigd: 1
ignition lead - thickness: 0.25"
3.4/3.8 - original for later models
Benodigd: 2
ignition lead - thickness: 0.13"
3.4/3.8 - original for later models
Benodigd: 3
90° angled - plastic reproduction with Champion lettering
Benodigd: 6
made in red vulcanised fibreboard with the correct rivets and brackets
Benodigd: 6
quick release type, polished aluminium. Monza style with 65 mm diameter
Benodigd: 1
