Rear brakes including handbrake mechanism
rear. Identify by 264 mm diameter - supplied in pairs
All Series I and II, Series III with GKN differential
Benodigd: 1
Series III with DANA limited slip differential
- alternatives
Benodigd: 2
- supplied in pairs
Series III with DANA limited slip differential
- alternatives
Benodigd: 1
brake disc to half shaft
All Series I and II, Series III with GKN differential
Benodigd: 8
brake disc to half shaft
Series III with DANA limited slip differential
Benodigd: 8
RH rear - reconditioned, in exchange
all XJ6 Series I, XJ6 Series II to end of 1975 (to 2S6333, 2S50205, 2T15417, 2T58038, 2J1901, 2J51895, 2H1453, 2H50018, 3A2903, 3A50663, 3B1905 and 3C1197)
Benodigd: 1
rear brake caliper bridge - bended two piece set in steel
Benodigd: 2
- one brake caliper
All Series I - Series II 4.2 Saloon to 2S6333, 2S50205, 2T15417 and 2T58038 - Series II 4.2 Coupe to 2J1901, 2J51895, 2H1453 and 2H50018 - Series II 3.4 to 3A2903, 3A50663 and 3B1905 - Series II Vanden Plas to 3C1197
Benodigd: 2
brake caliper
All Series I - Series II 4.2 Saloon to 2S6333, 2S50205, 2T15417 and 2T58038 - Series II 4.2 Coupe to 2J1901, 2J51895, 2H1453 and 2H50018 - Series II 3.4 to 3A2903, 3A50663 and 3B1905 - Series II Vanden Plas to 3C1197
Benodigd: 4
brake caliper - stainless steel
All Series I - Series II 4.2 Saloon to 2S6333, 2S50205, 2T15417 and 2T58038 - Series II 4.2 Coupe to 2J1901, 2J51895, 2H1453 and 2H50018 - Series II 3.4 to 3A2903, 3A50663 and 3B1905 - Series II Vanden Plas to 3C1197
Benodigd: 4
this kit services one caliper
Series II 4.2 Saloon from 2S6334, 2S50206, 2T15418 and 2T58039 - Series II 4.2 Coupe from 2J1902, 2J51896, 2H1454 and 2H50019 - Series II 3.4 from 3A2904, 3A50664, 3B1906 and 3B50001 - Series II Vanden Plas from 3C1198 and 3C50001 - all Series III
Benodigd: 2
rear brake caliper - chromed. Identified by 43 mm diameter
XJ6 Series 2 from end of 1975 ( from 3A2904, 3A50664, 3B1906, 2T15418, 2T58039, 2S6334, 2S50206, 3C1198, 2J1902, 2J51896, 2H1454, 2H50019), all XJ6 Series 3 (1979-86)
Benodigd: 4
achteras, M1802 (voorheen M1144) kwaliteit
Benodigd: 1
rear brake pads. Contents: 4 retaining pins and 4 securing clips
Benodigd: 1
LH - reconditioned, in exchange
All Series I - Series II 4.2 Saloon to 2S10116, 2S50581, 2T22972 and 2T68823 - Series II USA and Canada exports to 2T69450 - Series II 3.4 to 3A5115, 3A51460, 3B3226 and 3B50004 - Series II Vanden Plas to 3C1698 and 3C50011
Benodigd: 1
RH - reconditioned, in exchange
All Series I - Series II 4.2 Saloon to 2S10116, 2S50581, 2T22972 and 2T68823 - Series II USA and Canada exports to 2T69450 - Series II 3.4 to 3A5115, 3A51460, 3B3226 and 3B50004 - Series II Vanden Plas to 3C1698 and 3C50011
Benodigd: 1
RH - exchange
Series II 4.2 Saloon from 2S10117, 2S50582, 2T22973 und 2T68824 - Series II USA, Canada and Japan exports from 2T69451 - Series II 3.4 from 3A5116, 3A51461, 3B3227 and 3B50005 - Series II Vanden Plas from 3C1699 and 3C50012 - all Series II Coupe - all Series III models
Benodigd: 1
LH - exchange
Series II 4.2 Saloon from 2S10117, 2S50582, 2T22973 und 2T68824 - Series II USA, Canada and Japan exports from 2T69451 - Series II 3.4 from 3A5116, 3A51461, 3B3227 and 3B50005 - Series III Vanden Plas from 3C1699 and 3C50012 - all Series II Coupe - all Series III models
Benodigd: 1
handbrake pads - contents: 4 screws, 4 nuts, 4 shakeproof washers
Benodigd: 1
handbrake pads - LH outer
Benodigd: 2
handbrake pads - RH inner
Benodigd: 2
handbrake pads - LH inner
Benodigd: 2
handbrake operating lever - inner
Benodigd: 2
handbrake operating lever - outer
Benodigd: 2
handbrake mechanism to brake caliper - stainless steel
Alternatives
Benodigd: 4
handbrake pads - reproduction with fitting lugs with 1.7/8" apart
Reproduction made from high quality steel
Benodigd: 2
