Cylinder block - 4.2 engine
- used item
Series III
Benodigd: 1
reconditioned, in exchange
Series I and II
Benodigd: 1
cylinder head - length: 12.11/16"
From engine no. 7L66598
Benodigd: 7
cylinder head - length: 12.15/16"
From engine no. 7L66598
Benodigd: 3
cylinder head - length: 12.15/16"
From engine no. 7L1176 to 7L66597
Benodigd: 3
cylinder head - length: 6.13/16"
To engine no. 7L1175
Benodigd: 3
cylinder head - uprated version with 6.16/13" length and alignment dowel
to engine no. 7L1175
Benodigd: 3
cylinder head - length: 6.3/8"
To engine no. 7L1175
Benodigd: 10
cylinder head - length: 12.11/16"
From engine no. 7L1176 to 7L66597
Benodigd: 6
cylinder head, with alignment dowel - length: 6.13/16"
To engine no. 7L1175
Benodigd: 1
cylinder head, with alignment dowel - length: 13"
From engine no. 7L1176 to 7L66597
Benodigd: 1
cylinder head - length: 6.3/8"
From engine no. 7L1176 to 7L66597
Benodigd: 4
cylinder head, with alignment dowel - length: 6.5/8"
From engine no. 7L66598
Benodigd: 1
cylinder head - length: 6.3/8"
From engine no. 7L66598
Benodigd: 3
cylinder head - length: 6.13/16". Variant with 9/16" UNF thread on block side for badly worn cylinder blocks
With 9/16" UNF thread on block side for badly worn cylinder blocks - quantity as required
100 PSI
Saloon: RHD to 2T.16591 and 2S.7127 - LHD to 2T.60746 and 2S.50256, Coupe: RHD to 2J.2127 and 2H.1635 - LHD to 2J.52477 and 2H.50035, Vanden Plas: RHD to 3C.1306 - LHD to 3C.50002
Benodigd: 1
100 PSI
Saloon: RHD from 2T.16592 and 2S.7128 - LHD from 2T.60747 and 2S.50257, Coupe: RHD from 2J.2128 and 2H.1636 - LHD from 2J.52478 and 2H.50036, Vanden Plas: RHD from 3C.1307 - LHD from 3C.50003
Benodigd: 1
oil pressure switch
Series II and III
Benodigd: 1
cylinder block und water elbow - 240V variant for vehicles with external heater
Benodigd: 1
cylinder block und water elbow - 110V variant for vehicles with external heater
Benodigd: 1
Models with external heater
Benodigd: 1
RH side of block - 7/8"
To engine no. 8L89108
Benodigd: 1
oil pump drive shaft
Benodigd: 1
oil feed pipe to head
Benodigd: 1
oil gallery - galvanised version with 1/2" UNF thread, fitted to the RH side of the cylinder block
Benodigd: 6
oil gallery - brass version with 1/2" UNF thread, fitted to the RH side of the cylinder block
Benodigd: 6
LH side of block - 1.5/8"
To engine no. 7L1175
Benodigd: 6
LH side of block - 1.5/8"
From engine no. 7L1176
Benodigd: 9
rear crankshaft cover to cylinder block - diameter: 5/16"
Benodigd: 2
rear rope seal
Benodigd: 1
on LH side of cylinder block
To engine no. 7L4383
Benodigd: 1
crankshaft front. Please note: must be fitted in conjunction with distance piece 204336. The oil thrower must be discarded
From engine no. 8L203238
Benodigd: 1
krukas achterzijde. De ombouw word gemonteerd voor de flens, aan de binnenzijde. De krukas moet voor montage mechanisch geslepen worden. Hiervoor moet de krukas uitgebouwd worden. Het slijpen kan alleen door een gespecialiseerd revisie of motor bedrijf gedaan worden
Benodigd: 1
crankshaft rear. This kit replaces both types of original crankshaft seals. It is mounted on the inner side of the crankshaft flange, so the crankshaft needs to be processed at the former sealing surface. During an engine overhaul these changes can be easily done while grinding the crankshaft
XK6 engines with web in the rear recess of the oil sump
Benodigd: 1
