Cylinder block - XK150
used item
3.4 engine
Benodigd: 1
- used item
3.8 engine
Benodigd: 1
cylinder head, with alignment dowel - length: 6.1/2"
Benodigd: 1
cylinder head - length: 6.13/16". Variant with 9/16" UNF thread on block side for badly worn cylinder blocks
With 9/16" UNF thread on block side for badly worn cylinder blocks
cylinder block RH side - for oil filter flange
Benodigd: 1
cylinder block each side and rear end - 1.3/4"
Benodigd: 7
oil gallery - galvanised version with 1/2" UNF thread, fitted to the RH side of the cylinder block
Benodigd: 6
oil gallery - brass version with 1/2" UNF thread, fitted to the RH side of the cylinder block
Benodigd: 6
crankshaft to cylinder block
Benodigd: 1
rear crankshaft cover to cylinder block - diameter: 5/16"
Benodigd: 2
krukas achterzijde. De ombouw word gemonteerd voor de flens, aan de binnenzijde. De krukas moet voor montage mechanisch geslepen worden. Hiervoor moet de krukas uitgebouwd worden. Het slijpen kan alleen door een gespecialiseerd revisie of motor bedrijf gedaan worden
Benodigd: 1
crankshaft rear. This kit replaces both types of original crankshaft seals. It is mounted on the inner side of the crankshaft flange, so the crankshaft needs to be processed at the former sealing surface. During an engine overhaul these changes can be easily done while grinding the crankshaft
XK6 engines with web in the rear recess of the oil sump
Benodigd: 1
sealing aperture for heater element
Cars without heater
Benodigd: 1
securing oil feed pipe
Oil feed pipe from cylinder block to head
Benodigd: 1
oil feed pipe to cylinder head
Repair bolt - 1.1/4" long
Benodigd: 1
timing cover - two-piece
Part of our conversion gasket set 203081.
Benodigd: 1
